Cablesson HDelity User Manual - page 8
11 | Operational Approach
12 | Operational Approach
METHOD B: IR REMOTE CONTROL
METHOD A: PUSH-IN BUTTON
4. Default EDID Mode
A.
Push “Input+(Default)” button to select the input channel which you want to Learn Default EDID and then
keep pushing “input+(default)” button when you select your desired input channel.
B.
Push the “+” or “-” output push button and then the LED will show “E” “D” one time to enter Learn Default
EDID Mode
C.
Use “+” or “-” output push button to select the Default EDID mode (1~8)
D.
Release “Input+(Default)” button after selecting the desired Default EDID mode, and then the LED will
blink twice and the setting will be effective
E.
It will quit the Learn Default EDID Mode if you push the “input-(learn)” button before the setting is
effective
F.
The LED will show “0” “0” if the setting is success
The LED will show “F” “F” if the setting is failure
5. EDID Learning Mode
A.
Push “Input-(Learn)” button to select the input channel which you want to Learn EDID from HDMI output
and then keep pushing “Input-(Learn)” button when you select your desired input channel
B.
Push the “+” or “-” output push button and then the LED will show “E”“L” one time to enter Learn Output
EDID Mode
C.
Use “+” or “-” output push button to select the output port number
D.
Release “Input+(Default)” button after selecting the desired output port number, and then the LED will
blink twice and the setting will be effective
E.
It will quit the Learn Output EDID Mode if you push the “input+(default)” button before the setting is
effective
F.
The LED will show “0”“0” if the setting is success
The LED will show “F”“F” if the setting is failure
ON
Power-on the Matrix Switcher
OFF
Stand-by mode
Function
Button
PRESET
Preset mapping mode
SAVE
Save current mapping mode
Number Buttons 1-9
Select a number
+10
Reserved
TO
Transfer key
TAKE
Trigger the previous setting
SWITCH
Begin input and output selection
DEFAULT EDID
Begin default EDID selection
LEARN
Begin EDID learning from one output
ALL
Select all inputs or outputs
CLEAR
Clear the previous IR operation procedure
MUTE
Turn-off output’s video and audio
STATUS
Preset output status
F1
Reserved
F2
Reserved
F3
Reserved
F4
Reserved
OFF
ON
F1
F2
F3
F4
PRESET
SAVE
SWITCH
LEARN
ALL
STATUS
TAKE
+10
2
3
1
5
6
4
8
9
7
To
MUTE
CLEAR
DEFAULT
EDID
OFF
ON
F1
F2
F3
F4
PRESET
SAVE
SWITCH
LEARN
ALL
STATUS
TAKE
+10
2
3
1
5
6
4
8
9
7
To
MUTE
CLEAR
DEFAULT
EDID