1. DL manuals
  2. Cabletron Systems
  3. Switch
  4. 7C03 MMAC SmartSWITCH
  5. Installation Manual

Cabletron Systems 7C03 MMAC SmartSWITCH Installation Manual

Other manuals for 7C03 MMAC SmartSWITCH: User Manual
Manual is about: Portable Management Application for the 7C03, 7C04, and 7C04-R SmartSwitch Hubs

Summary of 7C03 MMAC SmartSWITCH

  • Page 1

    7c03 mmac smartswitch ™ installation guide 9031699-01.

  • Page 2: Notice

    Notice i notice cabletron systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult cabletron systems to determine whether any such changes have been made. The hardware, firmware, or soft...

  • Page 3: Fcc Notice

    Notice ii fcc notice this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Not...

  • Page 4: Vcci Notice

    Notice iii vcci notice this equipment is in the 1st class category (information equipment to be used in commercial and/or industrial areas) and conforms to the standards set by the voluntary control council for interference (vcci) by information technology equipment aimed at preventing radio interfe...

  • Page 5: Declaration of Conformity

    Notice iv declaration of conformity application of council directive(s): 89/336/eec 73/23/eec manufacturer’s name: cabletron systems, inc. Manufacturer’s address: 35 industrial way po box 5005 rochester, nh 03886-5005 european representative name: mr. J. Solari european representative address: cable...

  • Page 6: Contents

    V contents chapter 1 introduction 1.1 using this manual .........................................................................1-1 1.2 using the smartswitch manual set ...................................1-1 1.3 7c03 mmac smartswitch overview .......................................1-2 1.3.1 7x00 sm...

  • Page 7: Chapter  1

    1-1 chapter 1 introduction welcome to cabletron systems 7c03 mmac smartswitch installation guide . This manual is a simple installation and reference guide. The 7c03 mmac smartswitch is a unique self-contained module that can be placed into an mmac series chassis 1 . 1.1 using this manual chapter 1,...

  • Page 8

    1-2 introduction in addition, any local management information that is specific to a particular smartswitch interface module is described in a module specific local management appendix. For example, the 7e03-24 ethernet smartswitch interface module local management appendix explains information that...

  • Page 9

    Introduction 1-3 figure 1-1. 7c03 mmac smartswitch because the 7c03 mmac smartswitch does not attach to the data channels on the backplane of an mmac chassis, data can not be transmitted internally from smartswitch interface modules to the other modules in the mmac chassis. However, data can be tran...

  • Page 10: Note:

    1-4 introduction 1.3.1 7x00 smartswitch controller module the 7x00 smartswitch controller module is the only processing and management element in the 7c03 mmac smartswitch. The 7x00 module has no front panel data ports. All data enters and exits the 7x00 module via the smartswitch bus on the 7c03 mm...

  • Page 11: 1.3.3  Operations

    Introduction 1-5 1.3.3 operations data packets entering through the front panel of a smartswitch interface module in the 7c03 mmac smartswitch are converted by the module’s hardware into frames that have a common “canonical” format. Canonical frames are forwarded along the 7c03’s smartswitch bus to ...

  • Page 12: 1.4  Related Manuals

    1-6 introduction 1.4 related manuals the following manuals supplement the procedures and other technical data provided in this manual. The procedures will be referenced where appropriate, but will not be repeated. Cabletron systems smartswitch interface module user’s guides (module specific). Cablet...

  • Page 13: Chapter  2

    2-1 chapter 2 installation this chapter contains instructions for unpacking and installing the 7c03 mmac smartswitch in an mmac chassis. The 7c03 mmac smartswitch can be installed in an mmac-m5fnb or in an mmac-m8fnb chassis. Note: because of the modular nature of the power supplies and interface mo...

  • Page 14

    2-2 installation 2.2 installing the 7c03 mmac smartswitch prior to installing the 7c03 mmac smartswitch, please read the note that appears on page 2-1. To install the 7c03 mmac smartswitch in an mmac-m5fnb or mmac-m8fnb chassis, use the following steps and refer to figure 2-1. 1. Remove the blank pa...

  • Page 15

    Installation 2-3 figure 2-1. Installing the 7c03 mmac smartswitch in an mmac-m8fnb card guide plastic rail.

  • Page 16: Chapter  3

    3-1 chapter 3 technical specifications this chapter includes the technical specifications for cabletron systems 7c03 mmac smartswitch. Cabletron systems reserves the right to change these specifications at any time without notice. 3.1 service mtbf: >200,000 hours mttr: 3.2 physical 3.2.1 dimensions ...