- DL manuals
- Cabletron Systems
- Switch
- 7F06-02 FDDI SmartSwitch
- User Manual
Cabletron Systems 7F06-02 FDDI SmartSwitch User Manual
Summary of 7F06-02 FDDI SmartSwitch
Page 1
Title page 7f06-02 fddi smartswitch ™ interface module user’s guide 903 9031672-02.
Page 3: Notice
7f06-02 fddi smartswitch interface module user’s guide i notice cabletron systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult cabletron systems to determine whether any such changes...
Page 4
Notice ii 7f06-02 fddi smartswitch interface module user’s guide doc notice this digital apparatus does not exceed the class a limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the canadian department of communications. Le présent appareil numér...
Page 5
Notice 7f06-02 fddi smartswitch interface module user’s guide iii cabletron software program license 1. License. You have the right to use only the one (1) copy of the program provided in this package subject to the terms and conditions of this license agreement. You may not copy, reproduce or trans...
Page 6
Notice iv 7f06-02 fddi smartswitch interface module user’s guide declaration of conformity application of council directive(s): 89/336/eec 73/23/eec manufacturer’s name: cabletron systems, inc. Manufacturer’s address: 35 industrial way po box 5005 rochester, nh 03867 european representative name: mr...
Page 7: Contents
7f06-02 fddi smartswitch interface module user’s guide v contents chapter 1 introduction 1.1 using this manual....................................................................... 1-1 1.2 the 7f06-02 module ................................................................... 1-1 1.2.1 cable type an...
Page 8
Contents vi 7f06-02 fddi smartswitch interface module user’s guide chapter 5 technical specifications 5.1 standards.....................................................................................5-1 5.2 emi............................................................................................
Page 9: Chapter 1
7f06-02 fddi smartswitch interface module user’s guide 1-1 chapter 1 introduction welcome to cabletron systems 7f06-02 fddi smartswitch interface module user guide . This guide is a simple reference for installing and using the 7f06-02 module. Before installing this module, you should carefully read...
Page 10: 1.2.1
Chapter 1: introduction 1-2 7f06-02 fddi smartswitch interface module user’s guide 1.2.1 cable type and fpims the 7f06-02 module has two front panel connectors that interface to the 7x00 smartswitch module through the chassis backplane. The front panel connections are standard cabletron fpims. There...
Page 11: 1.2.2
Chapter 1: introduction 7f06-02 fddi smartswitch interface module user’s guide 1-3 1.2.2 7c03 mmac smartswitch, the 7c04 workgroup smartswitch and the 7c04-r workgroup smartswitch the 7f06-02 module is designed to be installed in the 7c03 mmac smartswitch, the 7c04 workgroup smartswitch or the 7c04-...
Page 12: 1.3.3
Chapter 1: introduction 1-4 7f06-02 fddi smartswitch interface module user’s guide 1.3.3 connectivity the 7f06-02 module has one backplane connection and two sets of a/b front panel fpim connections. The backplane connection provides power to the 7f06-02 module and a channel for communication with t...
Page 13: 1.5
Chapter 1: introduction 7f06-02 fddi smartswitch interface module user’s guide 1-5 1.5 getting help if you need additional support related to this device, or if you have any questions, comments, or suggestions concerning this manual, contact the cabletron systems global call center: before calling t...
Page 14
Chapter 1: introduction 1-6 7f06-02 fddi smartswitch interface module user’s guide.
Page 15: Chapter 2
7f06-02 fddi smartswitch interface module user’s guide 2-1 chapter 2 network requirements before installing cabletron systems 7f06-02 module, review the network requirements outlined in this chapter. All requirements included in this chapter should be met to ensure satisfactory performance of the 7f...
Page 16: 2.1.2
Chapter 2: network requirements 2-2 7f06-02 fddi smartswitch interface module user’s guide the link distance is up to 2 kilometers on the multimode fiber optic cable as specified by ansi mmf-pmd. 2.1.2 fpim-02 and fpim-04 the fpim-02 has an rj-45 connector supporting an unshielded twisted pair (utp)...
Page 17: 2.1.3
Chapter 2: network requirements 7f06-02 fddi smartswitch interface module user’s guide 2-3 2.1.3 fpim-05 and fpim-07 the fpim-05 and fpim-07 provide a single-mode fiber connection. The fpim-05 uses a mic style connector and the fpim-07 uses an sc type connector. The specifications for both devices a...
Page 18
Chapter 2: network requirements 2-4 7f06-02 fddi smartswitch interface module user’s guide.
Page 19: Chapter 3
7f06-02 fddi smartswitch interface module user’s guide 3-1 chapter 3 installation/removal this chapter contains instructions for unpacking and installing the 7f06-2 module in the: • 7c03 mmac smartswitch • 7c04 workgroup smartswitch • 7c04-r workgroup smartswitch also included in the chapter are ins...
Page 20: 3.2
Chapter 3: installation/removal 3-2 7f06-02 fddi smartswitch interface module user’s guide 3.2 installing fpims the 7f06-02 module is shipped without fpims. To install an fpim, follow the procedure below: 1. Remove the module if it is installed in the 7c03 mmac smartswitch chassis by reversing the p...
Page 21: 3.3
Chapter 3: installation/removal 7f06-02 fddi smartswitch interface module user’s guide 3-3 3.3 installing/removing the 7f06-02 module the following procedure details the installation and removal procedure for the 7f06-02 module. 3.3.1 installing in the 7c03 smartswitch the 7f06-02 module is installe...
Page 22: 3.3.2
Chapter 3: installation/removal 3-4 7f06-02 fddi smartswitch interface module user’s guide 3.3.2 removing from the 7c03 smartswitch the 7f06-02 module inserted in the 7c03 mmac smartswitch can be removed upon proper removal of power. Follow the steps below and refer to figure 3-3 to remove the modul...
Page 23: 3.3.3
Chapter 3: installation/removal 7f06-02 fddi smartswitch interface module user’s guide 3-5 3.3.3 installing in the 7c04 or 7c04-r workgroup smartswitch the 7f06-02 module is installed in the 7c04 or 7c04-r workgroup smartswitch using the following steps and referring to figures 3-4 and 3-5. Notes: t...
Page 24
Chapter 3: installation/removal 3-6 7f06-02 fddi smartswitch interface module user’s guide figure 3-4 installing the 7f06-02 module in the 7c04 workgroup smartswitch figure 3-5 installing the 7f06-02 module in the 7c04-r workgroup smartswitch sn 1 2 3 4 7x00 sp screw ejector tab sn 7a06-01 sp fans 4...
Page 25: 3.3.4
Chapter 3: installation/removal 7f06-02 fddi smartswitch interface module user’s guide 3-7 3.3.4 removing the 7f06-02 from the 7c04 or 7c04-r workgroup smartswitch the 7f06-02 module, inserted in the 7c04 or the 7c04-r workgroup smartswitch, can be removed whenever necessary. Follow the steps below ...
Page 26
Chapter 3: installation/removal 3-8 7f06-02 fddi smartswitch interface module user’s guide figure 3-7 removing the 7f06-02 module from the 7c04-r workgroup smartswitch fans sn 4 3 2 1 ejector tabs screws.
Page 27: Chapter 4
7f06-02 fddi smartswitch interface module user’s guide 4-1 chapter 4 troubleshooting 4.1 diagnostic and monitoring system the 7f06-02 module uses lanview, cabletron systems’ built-in visual diagnostic and status monitoring system. With lanview leds the status of each transmit and receive port on the...
Page 28: 4.2
Chapter 4: troubleshooting 4-2 7f06-02 fddi smartswitch interface module user’s guide 4.2 port receive leds table 4-1 indicates the state of the receive port. 4.3 port transmit leds table 4-2 indicates the state of the transmit port. 4.4 a/b link leds table 4-3 indicates the state of the a/b link le...
Page 29
Chapter 4: troubleshooting 7f06-02 fddi smartswitch interface module user’s guide 4-3 green off green green thru b, mac on secondary, primary bypasses board green yellow green green thru b, mac on secondary, no mac on primary green yellow off green thru, no mac on primary, secondary bypasses board g...
Page 30
Chapter 4: troubleshooting 4-4 7f06-02 fddi smartswitch interface module user’s guide.
Page 31: Chapter 5
7f06-02 fddi smartswitch interface module user’s guide 5-1 chapter 5 technical specifications this chapter includes the technical specifications for 7f06-02 module. Cabletron systems reserves the right to change these specifications at any time without notice. 5.1 standards ieee 802.1d ieee 802.3i 1...
Page 32: 5.5
Chapter 5: technical specifications 5-2 7f06-02 fddi smartswitch interface module user’s guide 5.5 safety it is the responsibility of the person who sells the system to which the module will be a part to ensure that the total system meets allowed limits of conducted and radiated emissions. This equi...