Cabletron Systems ELS100 Installation And User Manual - Factory Defaults
9032579-03
ELS100-24TX User Interface 23
Factory Defaults
Table 3-1 lists the factory default settings for the switch configuration
parameters. Each of these parameters can be changed via the console
menus or Telnet.
Table 3-1. Factory Default Settings
Parameter
Default Value
Active Aging Time
300
Auto-negotiation Enable
Yes
Broadcast Cutoff Rate
500000
BootP/DHCP Enable
Yes
Bridge Priority
32768
Class of Service Enable
No
Class of Service Port Priority
0
Class of Service Priority Thresh-
old
4
Flow Control Enable
No
Forward Delay
15
Full Duplex
Yes
Hello Time
2
Max Age
20
Password
Path Cost
10 for 100Mbps speed ports
100 for 10Mbps speed ports
Port Enable
Yes
Port Priority
128
Port Speed
100
Port Mirroring Enable
No
Screen Timeout
0
SNMP Private Community Name
private
SNMP Public Community Name
public
Spanning Tree Protocol Enable
Yes
Terminal Baud Rate
9600
Terminal Hardware Flow Control
No
VLAN Enable
No
VLAN Port Type
Access