Cabletron Systems RoamAbout User Manual - Installing The Pc Card
of
88
Installing the PC Card
3-2 Installing the RoamAbout Access Point
Installing the PC Card
To install the PC Card, do the following:
Step
Action
1
With the logo on the PC Card facing the same direction as the AP’s BNC
connector, partially insert the card into the PC Card slot.
2
Gently push the card into the slot until it is firmly seated. You will sense
a slight resistance as you insert the card. When properly inserted, the
card protrudes approximately 1-1/2 inches from the AP.
1
2
R
o
a
m
A
b
o
u
t
Access Point
Logo
PC Card
2844_01_04
BNC
Connector