Cache iShower2 User Manual - 3. Using The Ishower
• Hold the Bluetooth/Pair button for 5 seconds on the iShower
2
to enter
Setup Mode.
• Use the forward and back buttons to select the proper USE#.
• Press the Play/Pause button to select the displayed user for setup. The
iShower
2
will try to pair for 30 seconds.
• Select iShower
2
in your Bluetooth settings. Your device will now
complete the pair with the iShower
2
.
• Once the connection has been made, the iShower
2
logo will stop blinking
and turn solid blue.
2.4 Mount Installation
• Peel off protective cover on back of the mount.
• Clean and dry the surface you are attaching the mount to.
•
Place mount at desired location and press firmly.
2.5 Mount Removal
Wear safety glasses while removing the mount
• Insert a putty knife blade (or similar tool) between the mount and the
wall. While gently pulling, use the blade to break the bond between the
wall and the mount. The adhesive is not reusable.
Note: Be sure the tool you use will not damage the wall.
3. Using the iShower
2
3.1 Navigating between users
To navigate between different users on your iShower
2
follow these steps: