Cache iShower2 User Manual - page 5
• Press Bluetooth/Pair button, this will enter User Select Mode. The
iShower
2
will display the last user connected.
• Use forward and back buttons to select USE#. The iShower
2
will only
display users that are paired.
• Press Play/Pause to select user. If a user is in range and Bluetooth is on,
the iShower
2
will connect and begin playing audio. If the iShower
2
does
not connect, it will display USE# Fail. Make sure your device is within
range, on and ready for Bluetooth. Repeat steps to attempt connection.
3.2 Overriding Users
To override users on the iShower
2
follow these steps:
• Choose Selected Use# which you wish to override.
• Hold the Bluetooth/Pair button for 5 seconds.
• Press the Play/Pause button. The iShower
2
will try to pair for 30 seconds.
• Tap on the iShower
2
in your Bluetooth pairing list to pair the new user.
3.3 Play/Pause/Forward/Back
• To play tracks from your iShower
2
press the play button.
• To pause a track from your iShower
2
press the pause button.
• To skip to the next track on your iShower
2
press the forward button.
• To listen to a previous track press the back button.
3.4 Clock
The clock function allows you to get a quick glimpse of the current time on
your iShower
2
.
To set the clock on your iShower
2
:
• Hold the clock button until the display starts blinking the current set
time.
• Use the Forward and Back buttons to adjust the desired time.