Caci Microlift User Manual - page 7
OPERATION
Fig.7
Fig.8
NOTE:
Press the Power button to reset your selections at any time.
The following shows how to operate the handset:
1. Select Treatment Program
Press the
PROG
button to toggle between programs.
The following programs are displayed
•
TONING
•
WRINKLES
The selected program will flash. (as shown in fig.7)
2. Select Treatment Intensity
Press the
MODE
button to toggle between intensity
levels.
The following intensity levels are displayed:
•
L (Low)
•
M (Medium)
•
H (High)
The selected intensity level will flash.
(as shown in fig.8)
NOTE:
Use a L (Low) or M (Medium) intensity for the first 4 treatments.
If the intensity level is comfortable use the H (High) setting for the remaining
treatments.
12
The Clock icon will begin to flash and the 5 minute
Countdown Timer will commence.
3.
Start the Treatment Program
Press the
button to start the treatment program.
(see fig. 9)
ENSURE ELECTRO BUDS ARE INSERTED TO ALL 4 PROBES
BEFORE STARTING TREATMENT. REFER TO PAGE 11
NOTE:
The CACI Microlift will automatically switch off after 3 minutes when
not in use.
NOTE:
If Countdown Timer runs out before completing
the treatment reselect the Treatment Program and
perform the remaining steps.
OPERATION
To pause during treatment press the
button twice in rapid succession.
Press again to re-start. (see fig. 9)
Press the button. (see fig. 9)
To Pause The Treatment Program
To Stop/Reset The Treatment Program
Fig.9
Audible ‘BEEPS’ will commence shortly after all 4 probes are in contact with
the skin. This indicates the system is working and electrical impulses are
being delivered.
(
Refer to Troubleshooting page 24 if ‘BEEPS’ are not heard).
13
DO NOT USE THE H (HIGH) INTENSITY AROUND THE EYES.
Refer to Toning Program pages 14-17 and
Wrinkles Program pages 20-22 for details of how to
perform the treatment.
Video guide available online www.cacimicrolift.com