Caci Microlift User Manual - page 9
TONING PROGRAM
NOTE:
If the Electro Bud tips become dry, moisten with water. When the
Electro Bud serum has been completely absorbed or the Electro Buds
become worn, replace with new ones.
NOTE:
Before commencing treatment ensure all make-up is removed and the
face is cleansed.
It is normal to experience the following during use.
• A tingling sensation
• Flashing around the eyes
• A metallic taste
Audible ‘BEEPS’ will commence shortly after all 4 probes are in contact with
the skin. This indicates the system is working and electrical impulses are being
delivered.
(
Refer to Troubleshooting page 24 if ‘BEEPS’ are not heard).
Using the ‘PINCH’ and ‘RELEASE’ techniques hold the probes in position for
6 seconds or until the audible ‘BEEPS’ become more rapid, which indicate you
should move to the next step.
1.
Insert Electro Buds (see page 11)
2.
Select the treatment program and intensity level (see pages 12-13).
3. Press to commence treatment.
4.
Follow treatment steps 1-18 as shown on pages 18 -19.
COMMENCING THE TREATMENT
17
16
TONING PROGRAM
1.
Grip the handset using both hands and close the probes together.
2.
Place the probes on the start points (see example fig.13). Ensure all 4
probes are in contact with the skin.
3.
Gradually open the probes using both hands until they reach the finish
points (see example fig.14). Do not extend the probes beyond the
targeted treatment area.
4.
Hold in position for approximately 6 seconds or until the audible ‘BEEPS’
become more rapid.
RELEASE TECHNIQUE
(for toning treatment steps 13-18)
Fig.13
Fig.14
NOTE:
The start and finish points are indicative only and should be
adapted according to your face shape. Do not extend the probes beyond the
targeted treatment area.
TO AVOID DAMAGE DO NOT OPEN THE HANDSET TOO WIDE APART.
Video guide available online: www.cacimicrolift.com
Video guide available online: www.cacimicrolift.com