- DL manuals
- Cactus
- Storage
- 602 SERIES
- Product Manual
Cactus 602 SERIES Product Manual
Summary of 602 SERIES
Page 1
Cactus technologies, limited -602 series industrial grade sata ssd product manual april 1, 2011 corporate headquarters suite c, 15/f, capital trade center 62 tsun yip street, kwun tong kowloon, hong kong 1.
Page 2
Cactus technologies, limited the information in this manual is preliminary and is subject to change without notice. Cactus technologies ® , limited shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furn...
Page 3: Table Of Contents
Cactus technologies, limited table of contents 1.Introduction to cactus technologies -602 series industrial grade sata ssd products .........................................4 1.1.Supported standards.........................................................................................................
Page 4
Cactus technologies, limited 1.Introduction to cactus technologies -602 series industrial grade sata ssd products features: • solid state design with no moving parts • industry standard 2.5” or 1.8” sata drive form factor • capacities from 8gb to 128gb • compliant with serial ata 2.6 specifications ...
Page 5
Cactus technologies, limited 1.1. Supported standards cactus technologies -602 series sata ssd is fully electrically compatible with the following specification: • ata 7 specification published by ansi: x3.221 at attachment interface for disk drives • serial ata 2.6 specification published by the se...
Page 6: 2.Product Specifications
Cactus technologies, limited these defect and error management systems, coupled with the solid-state construction, give cactus technologies -602 series industrial sata ssds unparalleled reliability. 1.2.3. Power supply requirements cactus technologies -602 series industrial sata ssd operates at a vo...
Page 7
Cactus technologies, limited notes : all values quoted are typical at ambient temperature and nominal supply voltage unless otherwise stated. Sleep mode is specified under the condition that all drive inputs are static cmos levels and in a “not busy“ operating state. 2.3. System performance all perf...
Page 8
Cactus technologies, limited 2.5.1. 2.5” sata ssd physical specifications cactus technologies limited -602 series industrial grade sata ssd product manual v1.4 8.
Page 9
Cactus technologies, limited figure 2-1. 2.5” sata ssd dimensions cactus technologies limited -602 series industrial grade sata ssd product manual v1.4 9.
Page 10
Cactus technologies, limited 2.5.2. 1.8” sata ssd physical specifications cactus technologies limited -602 series industrial grade sata ssd product manual v1.4 10
Page 11: 3. Interface Description
Cactus technologies, limited 3. Interface description the following sections provide detailed information on the cactus technologies -602 series industrial sata ssd interface. 3.1. Ssd pin assignments and pin type cactus -602 series sata ssd uses industry standard 7+12 connector. The signal/pin assi...
Page 12
Cactus technologies, limited signal name dir. Description txn ao differential transmit negative txp ao differential transmit positive 3.3v 3.3v power supply; not used 12v 12v power supply; not used gnd -- ground. 5v 5v power supply 3.3. Electrical specification the following table defines all d.C. C...
Page 13: Protocol
Cactus technologies, limited 4.Ata drive register set definition and protocol the communication to or from the sata ssd is done using fis. Legacy ata protocol is supported by using the legacy mode defined in the sata specifications. In this mode, the fis has defined fields which provide all the nece...
Page 14
Cactus technologies, limited 4.1.4. Sector count register this register contains the number of sectors of data requested to be transferred on a read or write operation between the host and the ssd. If the value in this register is zero, a count of 256 sectors is specified. If the command was success...
Page 15
Cactus technologies, limited 4.1.9. Status registers these registers return the status when read by the host. Reading the status register does clear a pending interrupt while reading the auxiliary status register does not. The meaning of the status bits are described as follows: d7 d6 d5 d4 d3 d2 d1...
Page 16: 5.Ata Command Description
Cactus technologies, limited 4.1.11. Drive address register this register is provided for compatibility with the at disk drive interface. It is recommended that this register not be mapped into the host's i/o space because of potential conflicts on bit 7. The bits are defined as follows: d7 d6 d5 d4...
Page 17
Cactus technologies, limited command code fr sc sn cy dh idle e3h - y - - d idle immediate e1h - - - - d initialize drive parameters 91h - y - - y read dma c8h or c9h - y y y y read dma ext 25h - y y y y read fpdma queued 60h y y y y y read log ext 2fh y y y y y read multiple c4h - y y y y read mult...
Page 18
Cactus technologies, limited 5.1.1. Identify drive—ech the identify drive command enables the host to receive parameter information from the drive. This command has the same protocol as the read sector(s) command. The parameter words in the buffer have the arrangement and meanings defined in table 5...
Page 19
Cactus technologies, limited word address default value total bytes data field type information 67 0078h 2 minimum pio cycle time without iordy flow control is 120ns. 68 0078h 2 minimum pio cycle time with iordy flow control is 120ns. 69-74 0000h 10 reserved 75 0000h 2 queue depth of 1 76 0106h 2 su...
Page 20
Cactus technologies, limited appendix a. Ordering information model kd x f yt -602s a where: x is drive capacities: 4g ---------------- 4gb 8g ---------------- 8gb 16g -------------- 16gb 32g -------------- 32gb 64g -------------- 64gb 128g ------------ 128gb where y is temperature: blank ----------...
Page 21
Cactus technologies, limited appendix b.Technical support services b.1.Direct cactus technical support cactus technologies limited suite c, 15/f, capital trade center 62 tsun yip street, kwun tong kowloon, hong kong tel: +852-27972261 fax: +852-27973777 email: tech@cactus-tech.Com cactus technologie...
Page 22
Cactus technologies, limited appendix c.Cactus worldwide sales offices cactus technologies limited suite c, 15/f, capital trade center 62 tsun yip street, kwun tong kowloon, hong kong tel: +852-27972277 fax: +852-27973777 email: sales@cactus-tech.Com cactus technologies limited -602 series industria...
Page 23
Appendix d.Limited warranty i. Warranty statement cactus technologies warrants its industrial grade products only to be free of any defects in materials or workmanship that would prevent them from functioning properly for five years from the date of purchase. This express warranty is extended by cac...
Page 24
Iv. Receiving warranty service according to cactus technologies warranty procedure, defective product should be returned only with prior authorization from cactus technologies limited please contact cactus technologies customer service department (tech@cactus-tech.Com) with the following information...