Cactus 602 SERIES Product Manual - page 4
Cactus Technologies, Limited
1.Introduction to Cactus Technologies -602
Series Industrial Grade SATA SSD Products
Features:
•
Solid state design with no moving parts
•
Industry standard 2.5” or 1.8” SATA Drive form factor
•
Capacities from 8GB to 128GB
•
Compliant with Serial ATA 2.6 specifications
•
Supports Serial ATA Generation I/II transfer rate of 1.5/3.0Gbps
•
Optional support for ATA SMART Feature Set
•
Optional support for ATA Security Feature Set
•
BCH ECC capable of correcting 8 random single bit errors per sector
•
High reliability, MTBF > 4,000,000 hrs.
•
Enhanced error correction,
14
bits read
•
Intelligent power management to reduce power consumption
•
Voltage support: 5.0V
±
10%
The Cactus Technologies -602 Series SATA Solid State Drive(SSD) is a high capacity solid-
state flash memory product that complies with the Serial ATA 2.6 standard and is
functionally compatible with a SATA hard disk drive. Cactus -602 Series SATA SSDs provide
up to 128GB of formatted storage capacity in 2.5” form factor or up to 64GB in a 1.8” form
factor.
The Cactus Technologies -602 Series Industrial Grade SATA SSD product uses high quality
SLC NAND flash memory from well known vendors, such as Samsung Corporation. In
addition, it include an on-drive intelligent controller that manages interface protocols, data
storage and retrieval as well as ECC, defect handling and diagnostics, power management,
and clock control. The controller’s firmware is upgradeable, thus allowing feature
enhancements and firmware updates while keeping the BOM stable.
Cactus Technologies Limited
-602 Series Industrial Grade SATA SSD Product Manual
v1.4
4