Cactus RF60 User Manual - page 9
16
17
Setting Up RF60 Slave
L&%8}#^
to Slave mode by pressing
Mode
.
|
sequence:
)$&
2. Set all RF60 to the same
channel. Press
Menu
, use + or –
button to select the RF channel.
Press
Menu
to go back to main
screen. The selected chan-
status bar.
3. Assign RF60 Slave units to
either group A, B, C or D. Press
Group to select the
group
for
each RF60. Each press of the
&
change group in the sequence of
\%]%%>(
9.1
Commanding with RF60 Master
1. Set the on-camera RF60 to Master
mode by pressing
Mode
(see Sec-
jLP
2. Set RF60 Master to the same
channel as RF60 Slave units (see
&jLP
3. Check the group status on the
group panel. Only activated
KP\V]V
or D boxes.
4. On RF60 Master, you can change
$V
8}#^&\V]V
D group.
5. The default group is the Master
RF60 itself. In the display, the
[$\&(|8`
group is selected in the group
V
group activation status.
9.2