Caffitaly System Map Coffee Presto Owner's Manual - page 8
06
Electrical hazards
• To prevent electric shock, do not immerse the appliance, plug or power cable in water.
• Do not use the coffee-machine out in the open.
• Connect the machine to a power outlet with grounding system. The voltage must correspond to
the voltage specified in the data plate under the machine.
• Do not use the coffee machine if the appliance itself, the power cable or the plug is damaged
or after the machine has been knocked down.
• Do not make any alterations to the coffee machine or power cable. The coffee machine should
only be repaired by authorized service centres or qualified personnel to avoid any risks resulting
from inappropriate repair.
• The machine should be sited in a place that is inaccessible to children.
• Never leave the machine ON while unattended.
Always remove the power cable from the power outlet:
•Before removing or re-installing the water tank
•To fill the water tank
•In the event of a malfunction
•When the coffee machine is not being used for long periods of time
•Before cleaning the machine.
Do not pull the power cable to disconnect the plug from the power outlet.
Precautions against burns
• Steam and/or hot water can cause burns.
Do not aim the steam jet toward yourself and/or other people, animals, materials that are sensitive
to high temperatures and/or to humidity.
In the event that boiling water and/or steam escapes, beware of the danger of burns!
Do not touch the hot parts of the coffee machine, i.e. the steam wand. Use the steam function or
froth function only if the steam wand is immersed in a suitable container.
• When coffee is being made, water is pushed at high pressure through the coffee capsule in the
capsule holder. Always ensure, before coffee is dispensed, that the capsule holder is correctly
introduced and that the lever is pulled down completely.
• Do NOT lift the stop lever or remove the capsule-holder while coffee is being dispensed.
Safety notice – cutting hazard
Two sharp spikes are fitted in the capsule holder and capsule holder support. The purpose of the
spikes is to pierce the coffee capsule at the top and at the bottom when the capsule is introduced
in the capsule holder. Should you need to move the coffee machine to another location, you are
strongly advised to grab it from the casing.
Safety instructions