Cal-Royal CRCODE-202 Instruction And Programming Manual - To Change Access Code
10
6605 Flotilla St., Commerce, CA 90040
Tel (323) 888-6601 Fax (323) 888-6699
www.cal-royal.com
To Change Access Code
1. Press current access code.
2. Turn lever 70° and hold.
3. Press the Y button.
5HOHDVHWKHOHYHU¿UVWDQGWKHQWKH (Y button will stay pressed until code is changed) 5. Push the code change tool onto each button in turn, pushing in the buttons approximately 2mm turn counter-clockwise 180°. All buttons should now be in non-code position. 6. Test that all the buttons are in non-code by turning the lever handle which should retract the latch. If the latch can not be retracted, press “C” button and repeat step 3. 6.1 Otherwise, turn lever 70° and hold. Press the ³<´EXWWRQ5HOHDVHWKHOHYHU¿UVWDQGWKHQ the “Y” button. (“Y” button will stay pressed until code is changed) 7. To select button as a code button, push code tool over button. Press button in with tool approximately 2mm and turn clockwise 180°. CAL-ROYAL 1 2 3 4 5 X Y 6 7 8 9 0 Z C