- DL manuals
- Caliber
- Media Player
- MCD893
- Operating instructions manual
Caliber MCD893 Operating instructions manual
Summary of MCD893
Page 1
Dvd/vcd/cd/mp3/mp4/usb player with fm/mw tuner, bluetooth, and gps navigation system mcd893 operating instructions.
Page 2: Safety Precautions
En - 1 safety precautions to ensure safe driving, please adjust the volume to a safe & comfort level in case of emergency situations. You should still hear outside noises while driving. Never expose this unit, amplifier, and speakers to moisture or water for preventing electric sparks or fires. Plea...
Page 3: Safety Precautions
En - 2 safety precautions warning operate the unit correctly according to the manual instruction to prevent unnecessary problem. Caution this product is a class 1 laser product. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radi...
Page 4: Features
En - 3 dvd-r/rw compatibility it is possible to playback dvd-r/rw discs recorded with the video format and video recording format. Video cds featuring pbc compatibility it is possible to playback video cds featuring pbc (playback control). Wma and mp3 compatibility it is possible to playback wma and...
Page 5: Panel Controls
En - 4 panel controls safety notes: the dvd video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash dvd video functions will only operate when vehicle is in park and the parking brake is engaged. It is illegal in...
Page 6: Remote Controls
En - 5 remote controls press to turn on/off the unit. Remote control operating range the remote control can operate within a distance of 3~5m. 1. - select the following sources: >radio >disc (when disc inserted) >usb (when usb connected) >av1 >av2 (front av in) >bluetooth >navigation 2. - disc eject...
Page 7: Remote Controls
En - 6 remote controls replacing the lithium battery of remote control unit when the range of the operation of the card remote control becomes short or no functions while operating, replace the battery with a new lithium battery. Make sure the battery polarity replacement is correct. 1. Open the bac...
Page 8: Basic Operations
En - 7 basic operations when parking brake applied 1. If 'prk sw' cable is connected to hand brake switch, the video display of the tft monitor will be controlled by driving status, system setup and input video sources. 2. When the car is moving ahead, if the video disc is played, the screen appears...
Page 9: Disc Operation
En - 8 disc operation a - turn to main source menu b - display on screen control menu disc playback 1. When disc inserted, display shows read. For mp3 or disc with mixed files, reading time may exceed 1 minute. 2. Error will be displayed if error found in disc operation. 3. For vcd/cd, vcd or cd ico...
Page 10: Disc Operation
En - 9 random track playback (for cd/ vcd/mp3 only) you can play all the tracks in random order. 1. During playback, press rdm once or more. - rdm icon will appear on the display. 2. Press rdm again to select normal playback. Repeat during playback, press rept once or more. - rpt icon will appear on...
Page 11: Disc Operation
En - 10 mp3/mp4/photo menu disc operation dvd playback menu while playback touch the center of the screen: touch the icon to access desired function. 1. Display source menu 3. Stop 4. Track skip/seek dvd menu left/right 5. Display select menu 6. Audio select 7. Subtitle select 8. Play/pause/enter cd...
Page 12: Tuner Operation
En - 11 tuner operation radio menu touch to access desired function: 1. Display source menu. 2. Select previous/next preset station. 3. Touch to tune automatically. Press more than 2 seconds to tune manually. 4. Touch to select preset station 1-6. 5. Display select menu. 6. Hold it to scan preset st...
Page 13: Tuner Operation
En - 12 reg mode source menu -> setting menu ->rds setting menu -> reg on/off. Reg on: af function will implement the regional code (of the pi) and only stations in the current region can be tuned automatically. Reg off: af function will ignore the regional code (of the pi) and stations in the other...
Page 14: Bluetooth Operation
En - 13 bluetooth operation exit pair after pair successfully, if you want to disconnect, press pair button. The tft of the unit display “exit pair”, bluetooth icon disappear. Dial 1. Input dial number by the number button on the tft, touch or press key on the remote control to dial out. 2. Touch or...
Page 15: Bluetooth Operation
En - 14 bluetooth operation 3. Answer on/off set the automatic answering a call on/off. When answer on and paired ok, if there is an incoming call, in 15 seconds, the unit will answer automatically, and voice will be transferred to the unit too. When answer off and paired ok, if there is an incoming...
Page 16
En - 15 gps antenna installation guide you can mount the gps antenna in the car or out of the car. • fix the gps antenna to a suitable position on the dashboard behind the windscreen, and ensure no obstacles to receive gps signals. When the satellites determine your position, the navigation system c...
Page 17: Dvd Setup
En - 16 dvd setup press setup to display setup menu on the screen. Use to select setup items: system - language - audio - video system tv system: pal/ntsc/auto select the output video format in the setting menu. Screen saver: on/off the screen saver appears if disc stop last more than 3 minutes. Ori...
Page 18: Dvd Setup
En - 17 to will be in the selected language. If the dvd disc does not contain the audio file in the selected language, the dialogues you listened to will be in the default language. You can change the language by pressing [audio] key of the remote controller. Subtitle language select one language th...
Page 19: System Setup
En - 18 sound effect & tft setup touch sel on the tft, or press sel button on the remote control to enter select menu. Touch the tft or use remote control to adjust audio/video settings: audio: eq sound effect(flat-pop-rock-clas.-off)/bass/treble/balance/fader video: brightness/contrast/color/dim se...
Page 20: Device Connections
En - 19 device connections notes of connection • this unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before installing this unit to a recreational vehicle, a bus, or a truck, make sure the battery voltage is appropriate for this unit to be used, otherwise, in...
Page 21: Device Connections
En - 20 parking brake cable connections reverse driving cable connections device connections key a: connect to steering wheel control cable key a swc key b (standby) key b gnd gnd steering wheel control cable connections.
Page 22: Electrical Connections
En - 21 electrical connections wiring diagram gps antenna radio antenna in iso connector fuse 15a usb slot video 1 in(yellow) camera in (yellow) video out 2 (yellow) rear audio out-r (red) rear audio out-l (white) front audio out-r (red) front audio out-l (white) aux 1 in-l (white) aux 1 in-r (red) ...
Page 23: Installation Guide
En - 22 installation guide 1. If relevant, remove any other audio system from the car. 2. After unscrewing the four car radio attachment screws, insert the mounting sleeve into the dashboard. Fix it firmly in place by folding down the metal tabs. 3. If this has not already been done, attach the brac...
Page 24: Troubleshooting
En - 23 troubleshooting the following checklist can help you solve the problems which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Problem possible cause solution general the unit will not switch on. Car ignition i...
Page 25: Specifications
En - 24 specifications general power supply 12v dc (11v-16v) test voltage 14.4v, negative ground maximum power output 45wx4 channels continuous power output 30wx4 channels (4 10% t.H.D.) suitable speaker impedance 4-8 ohm pre-amp output voltage 2.0v (cd play mode: 1khz, 0 db, 10k load) fuse 15a dime...
Page 26
Class 1 laser product.