Calibre Fitness CIT-9013 Owner's Manual - page 9
Manual is about: cable crossover
of
21
─ 9 ─
Assembly
Step 1
1. Slide right slide frame (#7) onto slide guide tube (#5) as shown and lock into
one of the holes in tube.
2. Attach inner base (#1), main base (#2), middle base (#3), slide guide tube
(#5) using:
two M10*65 HHB (#40) two M12*80 HHB (#35)
four Φ13*Φ24*1.5 washers (#45) four Φ11*Φ20*2 washers (#46)
two M10 nylon lock nuts (#48) two M12 nylon lock nuts (#49)
NOTE: Hand tighten bolts and nylon nuts until STEP 6.