California Patio Gas BBQ Grill Owner's Manual - page 3
Contents Page
1.
Technical Data
2.
Guarantee
3.
Instructions for Assembly
4.
Setting Up
5.
Connecting gas
6.
Instructions for first users
7.
Instructions for use
8.
Cooking Tips
9.
Care & Maintenance
10.
Troubleshooting
3
3
4 - 10
11
11
11
12
12
12
10
1). Technical Data
Type of Gas Propane
Gas container Please contact your local dealer for correct size
Connection pressure 28 mbar butane / 37 mbar Propane
California Patio Grillino S COOKEY
(Sidecooker)
Power: 2 x 2,6 kW 2 x 2,6 kW 1 x 2,0 KW
Gas Consumption: 2 x 0,20 kg/hr 2 x 0,20 kg/hr 1 x 0,14 kg/hr
Total weight: 18,5 kg 23,2 kg 1,0 kg
Cooking space: 48 x 30 cm 48 x 30 cm 20 cm Ø
Warming rack space: --------------- 48 x 20 cm ------
Measurement (h x w x d) 106 x 108 x 42 cm 106 x 108 x 48,5 cm 5 x 27 x 38 cm
Burner: Bar-Burner Bar-Burner single burner round
Ignitor: Piezo Ignitor Piezo Ignitor Piezo ignitor
Lava rocks: Middle sized rocks 35 to 50mm /approx. weight 1,5 kg
Dia. of orifice
Ø
main valve 30 mbar = 0,84 mm
2.) Guarantee
In the unlikely event that the grill has a manufacturing fault, California Patio provides the purchaser
with a guarantee covering a period of 12 months from the date of purchase, provided that:
1.A receipt giving proof of purchase is produced.
2.That the faulty goods have not been wilfully damaged, used improperly, been altered in any way, assembled
incorrectly, badly maintained or rusted by exposure to the elements.
3.Claims are valid and that the customer has used the product in accordance with the manufacturers
instructions. Fat fires are not covered by this guarantee.
If the goods are reported damaged due to handling misuse caused during transit the purchaser must
report this to the place of purchase within 14 days.
Parts that do arrive damaged will be replaced free of charge if notification is received within 14 days of
purchase. If notification is received after 14 days, the damaged parts can be replaced, but a charge for
the part and carriage and packing will be made.
3.) Instructions for assembly
Read these instructions through carefully before commencing assembly, then follow them step by step. you
will need the following tools, A medium size cross recessed screwdriver, soft faced hammer, a pair of pliers to
hold the wheel axle while fitting the wheel nuts, and a 14mm hexagon socket spanner.
page 3