Callaway Micro Manual - Troubleshooting

10

   TROUBLESHOOTING

TROUBLESHOOTING

Rangefinder is consistently providing inaccurate measurements.

•   Make sure the device is set to the desired unit of measure 

(Yards or Meters). 

•   Weak battery signal can affect the accuracy of the device. If the 

Low Battery Indicator is present on the LCD display, replace 

the battery.

•   Make sure there isn’t anything obstructing your view such as 

leaves, branches, your finger, etc.

Measurment is not displayed

•   If using Prism Mode, a yardage will only be displayed when          

    laser is fired at a flagstick with a built-in reflector.

•   Weak battery signal can affect the accuracy of the device. If the 

Low Battery Indicator is present on the LCD display, replace 

the battery.

•   Make sure there isn’t anything obstructing your view such as       

    leaves, branches, your fingers, etc.

When should P.A.T Mode be used?

•   When measuring the distance to smaller targets such as 

     a flagstick.

•   When scanning the landscape to measure distances to a 

    smaller target such as a flagstick and there are trees or other         

    objects in the background. 

When should Prism Mode be used?

•   Only when measuring the distance to a flagstick with a 

    built in reflector.