Callaway Micro Manual - Laser Or Pin Mode.

4. 

Scanning - To measure distances to multiple targets in succession, 

HOLD the Power Button. Measurements will change as you scan 

the landscape and change targets. Scanning should only be used 

while in 

Laser or Pin Mode. 

NOTE:

 While scanning in P.A.T. Mode, the measurement will only 

change when a shorter distance is measured. This is useful when 

measuring the distance to a flagstick when there are trees or other 

objects in the background. 

5.

Unit of Measure - To change the unit of measure from Yards (“Y”) 

to Meters, 

PRESS Power Button to power on, then HOLD Mode 

Button (M). The unit of measure is indicated by a “Y” or “M” 

shown directly to the right of the distance displayed. 

PRISM MODE DIAGRAM

NOTE:

 The closer you are to the Pin, the more accurately you will    

     have to aim the Rangefinder in the direction of the built in reflector.

8

    HOW TO USE

Reflector located in 

Middle of Pin

Reflector located on

Top of Pin