1. DL manuals
  2. Calomax
  3. Boiler
  4. Eclipse Series
  5. Installation, Operation And Servicing Instructions

Calomax Eclipse Series Installation, Operation And Servicing Instructions

Summary of Eclipse Series

  • Page 1

    Installation, operation and servicing instructions for the eclipse range of water boilers please read these instructions carefully before operating your boiler for the first time issue 5 06/1 1 /2015 dcr :939 calomax limited lupton avenue, leeds ls9 7dd tel. 0113 249 6681 fax. 0113 235 0358 e-mail: ...

  • Page 2

    Page 2 contents introduction 3 check list 3 approvals 3 construction 4 installation 4 location 4 cold water inlet 5 access instructions 6 vent / overflow 7 electrical connections 8 user instructions 8 scale 9 general operation 9 cleaning 9 trouble shooting 10 accessories 11 spare parts 12/13 explode...

  • Page 3: Introduction

    Page 3 introduction thank you for purchasing a boiler from the calomax eclipse range. All our products are designed to give years of simple, reliable operation. To ensure this, it is important that the installation and subsequent servicing and maintenance is carried out by a suitably qualified engin...

  • Page 4: Location

    Page 4 location installation and maintenance all metallic components of the machine, in direct contact with drinking water are manufactured from high quality 304 grade stainless steel, or non ferrous materials, providing maximum resistance to corrosion. Construction to comply with recommendations fr...

  • Page 5: Cold Water Inlet

    Page 5 cold water inlet to comply with u.K. Water supply regulations a single check valve must be fitted . Before connecting, the supply pipe must be thoroughly flushed out to ensure that foreign matter does not block or enter the solenoid valve the boiler must be connected to a potable water supply...

  • Page 6: Access Instructions

    Page 6 access instructions access to the internals of the machine is gained by the removal of the front panel. Prise off the outercasing lid from its mounting clips. Remove the top two panel mounting screws, and the third bottom mounting screw (where fitted). Remove the cover. The 3c5c model does no...

  • Page 7: Vent & Overflow

    Page 7 vent & overflow the vent / overflow pipe must be extended and laid with a continuous fall, discharging to a safe and visible point. The pipe should not be directly connected to a closed waste, as taste problems may occur and should never be allowed to become blocked or restricted.15mm copper ...

  • Page 8: Subsequent Use

    Page 8 this equipment is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. C...

  • Page 9: Cleaning

    Page 9 cleaning avoid using any abrasive materials. Wiping the outer casing with a damp cloth should be sufficient. Some stainless steel cleaning products may not be suitable for plastic and must not come in contact with the plastic fascia parts. Always disconnect the electrical supply before cleani...

  • Page 10: Basic Trouble Shooting

    Page 10 basic trouble shooting symptoms possible cause remedy no boiling water available broken tap top element failed or tripped defective printed circuit board replace tap top (or component) replace element or reset replace circuit board overboiling excessive internal scale. (see ‘de-scale’ page 1...

  • Page 11: Accessories

    Page 11 accessories accessories shelf unit ref. Shu fused spur time switch ref. 7dfst max 3 kw plug-in time switch ref. 7dpit max 3 kw water filter kit (to reduce taste & odour problems) ref. Cwfk filter cartridge (replacement filter for kit shown above) ref. Cwfc1 for more information visit our web...

  • Page 12

    Page 12 spare parts are usually available ex-stock. Please quote model & serial number. Ettbk (black) ett (blue) cbtcw cbts mhsb (blue) uths (black) tbt dottk cbtss epcbt tn2ck e3brk etak msv tap top assembly tap cup washer tap spring draw off tap body tap slotted stem draw off tap body eclipse heat...

  • Page 13: Elpk

    Page 13 spare parts are usually available ex-stock. Please quote model & serial number. 17 elpk ps essk eclipse level probes kit eclipse silicone seal kit power switch 18 19 20 nbprg body lid grommet x8 various sizes 21 fih (1m) ih2m (2m) water inlet hose x2 x1 22 wih (1m) water inlet hose.

  • Page 14

    Page 14 11 12 19 * * complete set of 8 seals (2 sizes) exploded parts view for eclipse wall mounted boilers (to be read in conjunction with the spare parts list) 15 15 16 or 17.

  • Page 15

    Page 15 1 2 4 3 7 8 5 13 20 18 if parts required are not identified, please contact calomax limited (behind cap) 9 10 (inside moulding).

  • Page 16

    Page 16 exploded parts view for eclipse counter top models. (to be read in conjunction with the spare parts list) 11 12 19 * 15 or 14 17 * complete set of 8 seals (2 sizes).

  • Page 17

    Page 17 1 if parts required are not identified, please contact calomax limited 2 4 3 6 20 9 13 22 10 18 (inside moulding) (behind cap).

  • Page 18: And Hygiene Are Concerned.

    Page 18 when the red service indicator light on the front of the boiler is illuminated, the machine has been starved of water in excess of 20 minutes and the solenoid valve has been disabled to prevent damage to the solenoid coil through overheat. To re-energise the solenoid, the unit must be discon...

  • Page 19: De-Scale

    Page 19 de-scale to gain access to internals of the water tank, the body lid must be removed. Remove the 4 screws, break the lid gasket seal and lift it clear of the body. Note: whenever the body lid has been removed from the boiler a new lid gasket may be required to ensure a steam-tight joint. Dam...

  • Page 20: General Function

    Page 20 general function the printed circuit board (pcb) controls the heating and filling functions of the boiler by monitoring the thermistor and level sensors. The pcb also controls the external light unit to indicate the current state of the boiler. Red and yellow led’s on the circuit board indic...

  • Page 21

    Page 21 wi rin g s c hem at ic fo r ec lip s e r ang e wa ter b oi ler s tr iac pc b rcd in c om ing s ing le ph a s e s up p l y th r ou g h a do ub le po l e i s ol a ti n g s w it c h, fu s e an d (r e co m me n de d) rcd de v ic e ha v in g a ra t ed op e ra t ing cu r re n t no t ex c ee di n g...

  • Page 22: Dimensions And Weights

    Page 22 dimensions and weights model 3c5c 3c10 height (mm) 443 570 depth (mm) 355 355 width (mm) 240 240 drip tray clearance (mm) 150 175 working weight (kg) 20 30.5 model 2w3 3w5 3w7.5 3w10 3w15c height (mm) 435 510 610 610 610 depth (mm) 270 270 270 270 270 width (mm) 240 240 270 270 370 working w...

  • Page 23

    Page 23 calomax have manufactured water boilers in the uk for over 50 years. We are proud of our products and the back-up service we provide properly maintained and serviced, a calomax boiler should last many years and we have no hesitation in providing a full 12 months (mainland u.K.) parts and lab...

  • Page 24

    Page 24 please enter model & serial number for future reference please contact our service department for assistance calomax limited, lupton avenue, leeds ls9 7dd tel: 0113 249 6681 fax: 0113 235 0358 e-mail: service@calomax.Co.Uk model serial number draw off capacity 3c5 3c5c 3c10 2w3 3w5 3w7.5 3w1...