CALORIQUE BEL100 Installation Manual - page 5
www.calorique.com
5 |
P a g e
Setting Bel 100 for use in Kitchens, Conservatories, Halls etc.
i.e. Thermostat Within Room
1.
Switch thermostat off with power button
2.
Switch thermostat back on with clock symbol by holding down for a few seconds
3.
Continue pressing clock button until 09 appears in top left corner of screen
4.
With arrow down button press until 01 appears on centre of screen
5.
to store press power button
You have now set the thermostat to read room temperature.
To Set Current Date and Time
1.
Press clock button twice.
2.
The minutes section of the time display will flash
3.
To set use the up and down arrows
4.
Press H button and the hours display will flash
5.
To set use up and down arrows
6.
Press H button and day will flash
7.
To set use up and down arrows
8.
To Save your settings press F once
Setting Bel 100 Timer Function
1.
Press Clock Button Once to set your thermostat for MONDAY to FRIDAY
2.
Set desired TIME using up and down arrow keys for first ON setting (1)
3.
Press H and use up and down arrow keys to set TEMPERATURE for first ON setting in top left of screen
(Recommended Floor Temperature 21
0
C)
4.
Press H and use up and down arrow keys to set Time for first OFF setting (2)
5.
Press H and use up and down arrow keys to set TEMPERATURE for first OFF setting in top left of screen
(Recommended Floor Temperature 12
0
C)
6.
Repeat steps 2 and 3 as above for Second On Setting (3)
7.
Repeat steps 3 and 4 as above for Second OFF Setting (4)
8.
Press H to set your thermostat for Weekend
9.
Repeat steps 2 to 7 for Weekend settings
10.
Press F to save all settings
Option for BOOSTING temperature
1.
Press Arrow Up key and set to desired boost temperature
2.
Press H to store – Heating _ symbol and current temperature will appear and floor will heat to new SET
temperature
3.
Please NOTE – that at next time setting thermostat will revert to timer settings