Caltron Industries MD-15 User Manual - page 5
1.2.0 Heat Ventilation
There is heat ventilation on the top and the bottom part of the product. To avoid overheating,
do not block any ventilation openings with objects g. carpet). For the best ventilation,
allow the product to have 10cm radius of the opening.
1.2.1 Grounding or Polarization
This product could be equipped with an alternate plug.
1.2.2 Power –Cord Protection
Power supply cords should be routed so that they are unlikely to be walked on or pitched by
items placed upon them. Pay attention to the connection of plugs.
1.2.3 Power Sources
This product should be operated only from the type pf power source indicated on the rear
panel. If you are unsure of the type of power supply to your home, consult your dealer or
local power company.
1.2.4 Lightning and storms
Unplug the outlet during lighting, storms or long unused periods. This will prevent damages
and power-line surges to the product.
1.2.5 Overloading
Do not overload wall outlets, extension cords or integral convenience receptacles as this can
result in a risk of fire or electric shock.
1.2.6 Damage Handling
Unplug this product from the outlet of wall and request qualified service personnel under the
following conditions:
- When the power supply cord or plug is damaged
- When the picture display gets dimmer
- When liquid has been spilled or objects have fallen on to the product
- When the product has been exposed to rain or water.
- Adjust only those controls that are in the instruction manual. For improper adjustments may
result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation.
- When the product exhibits a distinct change in performance-this indicates a need for repair
service.
2