Calypso CA-1000 Quick Manual

3

www.calypsosystems.com

Making Connections 

7

Audio 1

Plug-in the power supply jack into the 12VDC (3.5A) power

socket of the CA-1000. 

Connect CH2 mini-audio jack to the CH2 port highlighted to

the left and as shown above.

1

Audio 2

Audio 3

Making Connections 

Terminate the 5-pin Phoenix screw-down connector to the

CH1 series-socket (next to 12VDC power port).

4

5

Connect CH3 mini-audio jack to the CH3 port as shown

above.

Head Phones

(optional)

IR Communication

(optional)

6

Serial Communication

Plug-in the headphones to the jack port as shown above.

Audio 4

8

Connect  the 4-pin IR Input/Output connector to the 4-pin

socket as shown above.

2

Power

Speakers

Connect the 5-pin Phoenix connector to the speaker series-

socket. 

Terminate the 2-pin Phoenix connector to the CH4+/CH4- (Bal)

series-socket as depicted above.

9

Terminate the 3-pin Phoenix connector to the 3-pin socket as

shown in the photo above. 

It is the responsibility of the service technician to

correctly prepare cables of proper-size and

length when using the Phoenix connectors pro-

vided

. 

NOTE: Connection illustrations listed below are 

provided with highlighted (in blue) port views. 

07.01.09