Cam B1 Installation Operating And Maintenance Istructions - Eng
22
-
Ed.1/2012 Rev.0
ENG
Adequate separated collection of waste for later recycling, treatment and
environmentally-friendly disposal is an important contribution towards avoiding a
negative impact on the environment and health, and it also facilitates the recycling
and/or re-use of the appliance's components.
Users who dispose of products in an unauthorised manner shall be liable for
administrative penalties in compliance with the legislation in force.
Registration in the electrical and electronic material manufacturer's register with the
number: IT08030000004407.
Warranty conditions
1) The manufacturer guarantees the operation and the duration of the products it manufactures. These
products were built in a professional manner and underwent a functioning test in the manufacturer's
workshop according to the specifications listed on the information plate and according to the theoretical
normal working conditions. This warranty is valid for 12 (twelve) months from the date of purchase which
is listed on the delivery documents or which can be deduced from the receipt issued by the dealer.
2) The warranty covers all the unit's components except for the electrical parts, the plastic parts and
other fragile parts, the knobs, the removable parts, the painting and the chromium plating, and any
accessories, since their condition depends directly on the user's care. The following are also not covered
by the warranty: all damage caused by carelessness when transporting or handling the product, by
negligence or incompetence when using the machine, by incorrect or bad installation or maintenance, by
an inadequate electrical system to which the machine is connected, and by tampering by unauthorized
personnel and/or personnel who are not qualified to work on the machine in a professional manner, as
well as for any other reason that does not depend on the manufacturer.
3) During the warranty period the manufacturer pledges, through the dealer that made the sale and
according to what is stated in the previous paragraph, to replace or repair free of charge those parts that
are defective due to original material defects or due to defects in workmanship. If on-site service is
requested, the user must pay a fixed charge for service calls according to the local rates in force or
according to the national industry rates. If the machine must be repaired at the factory, the user will be
exclusively responsible for all transport costs. Any repairs performed during the warranty period will not
extend it.
4) To be eligible for service under warranty, the user must exhibit the warranty certificate and the
receipt or delivery document to validate the purchase date of the machine. These documents must be
impeccably compiled and absolutely free of tampering, corrections, erasures, etc.
5) The manufacturer does not undertake any other responsibilities except for those regarding the
replacement of parts found to be defective according to its own unquestionable judgment. No
responsibility is undertaken for any damages to the client due to the machine not running, or due to the
time necessary to perform any service under warranty.
6) The manufacturer acknowledges only the warranty conditions listed on this certificate. No one is
authorized to modify them or to issue other verbal or written warranty conditions.
7) The Court of Manufacturer’s Town will be the exclusive competent court for any dispute arising
concerning the interpretation and/or the application of these warranty conditions. Italian law will be
applied exclusively regarding all legal aspects.