Cambridge Audio One+ User Manual - page 6
1
Skip/Scan
Use for skipping between tracks during playback. These buttons are also used to
scroll through available stations in DAB/FM mode. For more information refer to
'Operating instructions'.
2
Infrared sensor
Receives IR commands from the supplied remote control. A clear unobstructed line
of sight between the remote control and the sensor is required.
3
Standby/On
Switches the unit between Standby mode (indicated by the time on the display)
and on. Standby is an eco-friendly <0.5W low power mode. The unit may be left in
Standby mode when not in use.
This product has Auto Standby enabled as default. After inactivity of 30 minutes,
the product will automatically switch to Standby. See later section for further
details.
4
Phones
Allows for the connection of stereo headphones with a 3.5mm jack plug.
Headphones with an impedance of between 32 and 600 ohms are recommended.
Note:
Plugging in headphones will automatically mute the loudspeaker output.
5
(
MP3) input
This source input allows you to connect a portable audio device such as an MP3
player directly into the front of the unit using the 3.5mm stereo-jack (labelled ' ').
Select the MP3 input source through the main menu 'Audio Inputs' or direct MP3
button on the remote to listen to your portable audio device.
6
Source
Pressing this button will cycle through different sources: CD, DAB, FM, Aux,
Bluetooth, USB Audio, Opt and Coax inputs. Press the Select control knob to select
the source.
7
Presets
The One can store up to 5 presets for each of the DAB and FM bands. All 5 per band
are available from the remote control and also from the front panel.
Press and hold the appropriate button to store the presets. Press the appropriate
button to access the stored presets. See later sections for more information.
8
Display
LCD used to display functions, sources, settings etc. Refer to 'Operating instructions'
for more information.
9
CD Disc slot
Supports Audio CD's (CD-DA), MP3 files and WMA files played from CD, CD-R or CD-
RW discs. Disc can be inserted into the unit in any mode but not in Standby mode.
10
Play/Pause
Plays and pauses playback.
11
Stop/Eject
Press during playback to stop and press again to eject the Disc.
12
Volume control/Menu navigation and select
Rotate to adjust the volume.
Press and hold will switch to menu navigation. In menu navigation rotate the control
to move between various items and press the control in to select the highlighted
item. Press and hold again to exit menu settings.
1
11
9
8
12
10
2
3
4
5
6
7
Front panel controls
6