Cambridge SoundWorks NEWTON M50 User Manual - Introduction
3
INTRODUCTION
Thanks for choosing a Newton Series speaker.
The M50, M60 and M80 all feature the finest drivers,
precision internal crossover circuitry, and an elegant
enclosure design.
The Design Team at Cambridge SoundWorks believes
there is no better combination of audiophile-level
attention to detail and reasonable cost.
AFTER UNPACKING
Store the shipping carton and packing material for
future use and transport.
CONTENTS
M50
1. One pair of speakers
2. Eight rubber feet
3. Two 3/4" long 1/4" x 20 phillips head screws
M60
1. One pair of speakers
2. Eight rubber feet
M80
1. One speaker
2. Four rubber feet
3. Allen wrench
INSPECTING FOR DAMAGE
Examine each part carefully for shipping damage. If
there is any, do not install or use the speakers. Return
the speaker to the store or merchant where you made
the purchase or call Cambridge SoundWorks at
1-800 FOR-HIFI (1-800-367-4434) for assistance.
Front
Back
Rubber Feet
3/4" long 1/4"—20
phillips head screws
(M50 only)
+
—
8 Ohms
M50
Made in China
+
—
8 Ohms
M60
Made in China
HIGH
RANGE
LOW
RANGE
HIGH
RANGE
LOW
RANGE
+
—
—
+
FULL
RANGE
INPUT
8 Ohms
M80
Made in China
M50
Front
Back
M60
Front
Back
M80
Allen Wrench