Cambridge SoundWorks NEWTON M50 User Manual - Prepare The Speaker Wire
8
8
8
Use at least 18 gauge speaker cable for short runs
(under 15 feet). Use 16 gauge or heavier speaker
cable for longer runs.
1.
Determine how long the speaker cable should be
for each speaker. Cut the speaker cable into the
appropriate lengths.
2.
Strip 1/2" of insulation from the two individual con-
ductors in the speaker cable. Twist the exposed
strands of bare wire together.
3.
Attach any connector plugs (like banana plugs) at
this time.
4.
Determine which conductor you will use to connect
the positive terminals of the amplifier and speaker
together. Printing or a ridge on the insulation can
usually distinguish one of the two conductors of
a speaker cable. Sometimes the metal of the
conductors has two different colors.
PREPARE THE SPEAKER WIRE
Strip off 1/2"
Twist Bare Wire
+
—
8 Ohms
M50
Made in China
Speaker Wire Connection
for M50 and M60