CAME FROG A24 Installation Manual - page 4
#
#
Pa
g.
2
- M
an
u
al
c
od
e:
11
9
A
U
3
5
11
9
A
U
3
5
ve
r.
1.
0
1.
0
0
8
/2
0
10 © C
A
M
E c
an
ce
lli
auto
m
ati
ci
s.p.a. - T
h
e d
ata a
n
d i
nf
or
m
ati
on r
ep
orte
d i
n th
is
in
sta
lla
tio
n m
an
u
al
a
re s
u
sc
ep
tib
le to
c
h
an
g
e at a
ny ti
m
e a
n
d w
ith
ou
t o
b
lig
ati
on
o
n C
A
M
E c
an
ce
lli
auto
m
ati
ci
s.p.a. to n
otify u
se
rs.
ENGLISH
4.1 Operator
4 Description
2.1 Intended use
1 Legend of symbols
This symbol tells you to read the section with particular care.
This symbol tells you that the sections concern safety issues.
This symbol tells you what to say to the end-users.
2 Condition of use
The FROG operator was engineered to power residential and condominium swing gates.
The use of this product for purposes other than those described above and installation executed in a manner other than as
instructed in this technical manual are prohibited.
3 Reference Standards
“IMPORTANT INSTALLATION, SAFETY INSTRUCTIONS”
“CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY”
“THIS MANUAL IS ONLY FOR PROFESSIONAL OR QUALIFIED INSTALLERS”
2.2 Limits to use
This product is engineered and manufactured by CAME CANCELLI AUTOMATICI S.p.A. and complies with current safety regulations.
The operator is made up of a foundation box, a release assembly, a gearmotor and a transmission arm.
Zinc-plated press-forged fondation box for underground installation. On the inside is the release assembly with a customised, manual-
release key and the gearmotor – made of a cast aluminium shell, inside of which operates an irreversible, gear-ratio and, endless screw
plus helical crown system. A transmission arm is connected to the gearmotor.
4.2 Technical features
FROG A24 / FROG A24E
Motor power supply: 24V D.C.
Max draw.: 15 A
Power: 180W
Max Torque.: 320N
Opening time (90°): fron 16 to 45 s
Gear ratio: 1/1152
Duty cycle: Intensive use
Protection rating: IP67
Weight: 11,5 kg
For intensive use and condominiums: max weight of the gate 400kg with max length of 3.5m.
For its quality processes management CAME cancelli automatici is ISO 9001:2000 certified, and for its environmental management it is
ISO 14001 certified. CAME engineers and manufactures all of its products in Italy.
This product complies with the following standards: see declaration of conformity.