CAME GARD 8 SERIES Installation manual - page 26
Pa
g.
2
6
26
- M
an
u
al
c
od
e:
11
9
G
U
4
4
11
9
G
U
4
4
ve
r.
0
.4
0.
4
0
1/
2
0
12 © C
A
M
E c
an
ce
lli auto
m
ati
ci
s.p.a. - T
h
e d
ata a
n
d i
nf
or
m
ati
on
r
ep
orte
d i
n th
is
in
stall
ati
on m
an
u
al a
re s
u
sc
ep
tib
le to
c
h
an
g
e at a
ny tim
e a
n
d with
ou
t o
b
lig
ati
on
o
n C
A
M
E c
an
ce
lli auto
m
ati
ci
s.p.a. to n
otify u
se
rs.
ENGLISH
MALFUNCTIONS
REFERENCES
CHECKS
The unit neither opens nor shuts
1-2-3-4-6-8-20
1 - Use key to lock trap door
The unit opens but does not close
4-7-10
2 - Disable “steady movement” with dipswitch
The unit shuts but does not open
4-7-9
3 – Check power supply and fuses
No automatic closure
11-12-13
4 - N.C. safety contacts open (1-2 / 2-C1)
The unit does not work if the remote control is
used
2-14-16
6 - Disable master-slave function
The unit inverts direction
7
7 – Check spring tension and balancing
The unit works only with remote control
22
8 – Disable obstacle detection with dipswitch
The photoelectric cell does not react
12-23-24
9 – Check if end stop opens
The signalling LED indicator flashes rapidly
4
10 – Check if end stop closes
The signalling LED indicator remains on
13
11 - Activate “automatic closure” dip switch
The unit does not end its run
7
12 – Check the correct direction of movement
The bar is not properly balanced
7-15
13 - (2-3 / 2-4 / 2-7) command button
14 -Check jumper on AF43S, turn on/off power
15 – Check the bar length ratio with mountable accessories
16 – Re-save radio code
20 - Raise the motor torque
22 - Enter or duplicate the same code in all the remote
controls
23 - Activate the photoelectric cell with the dipswitch
24 - Connect the photoelectric cells in a series, not in
parallel
9.3 Problem solving
In its premises, CAME CANCELLI AUTOMATICI S.p.A. implements an Environmental Management System certifi ed in com-
pliance with the UNI EN ISO 14standard to ensure environmental protection.
Please continue our eff orts to protect the environment—which CAME considers one of the cardinal elements in the development of
its operational and market strategies—simply by observing brief recommendations as regards disposal:
DISPOSAL OF PACKAGING
I The packaging components (cardboard, plastic, etc.) are all classifi able as solid urban waste products and may be disposed of
easily, keeping in mind recycling possibilities.
Prior to disposal, it is always advisable to check specifi c regulations in force in the place of installation.
PLEASE DISPOSE OF PROPERLY!
PRODUCT DISPOSAL
IOur products are made up of various types of materials. Most of them (aluminium, plastics, iron, electrical wires, etc.) may be di-
sposed of in normal garbage collection bins and can be recycled by disposing of in specifi c recyclable material collection bins and
disposal in authorized centres. Other components (electrical boards, remote control batteries, etc.), however, may contain polluting
substances. They should therefore be removed and given to qualifi ed service companies for proper disposal.
Prior to disposal, it is always advisable to check specifi c regulations in force in the place of disposal.
PLEASE DISPOSE OF PROPERLY!
10 Demolition and disposal