Cameo CLDROPIX176 User Manual - Led Curtain:

LED CURTAIN:

SETUP AND STARTUP:

Attach the 2 x 1.3 m (66 LEDs), or 3.1 x 2 m (176 LEDs) large LED curtain using the eyelets mounted on the 

curtain hems and the supplied, reusable cable ties to a suitable stand or similar and smoothen the curtain fabric. 

Take care not to bend the inner cable and do not step on the curtain to avoid damaging the installed LEDs and 

electronics. Then connect the connection cable of the LED curtain to the corresponding connector of the controller

(2 x 1.3 m curtain with 66 LEDs to the connector LED DROPIX 66, 3.1 x 2 m curtain with 176 LEDs to the 

connector LED DROPIX 176).

After that, operate the controller by connecting it to a suitable mains supply and switch on. You can now select 

one of the internal programs, or operate the LEDDROPIX controller via a DMX control unit.

A 5 m extension cable, which is suitable for both curtains can be purchased as an optional accessory (CL-

DROPIXEXT5). 

IMPORTANT WHEN REMOVING, PACKING, TRANSPORTING AND STORING:

Take care not to bend the inner cable of the LED curtains when disassembling and packing. Do not step on the 

curtain to avoid damaging the installed LEDs and electronics. Carefully fold the LED curtains and place them in 

the designated transport bags. During transportation and storage, do not place heavy objects on the transport 

bags of the LED curtains.

10

11

IT

ALIANO

POLSKI

ESP

AÑOL

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

DEUTSCH

ENGLISH