Cameo CLDROPIX176 User Manual - Operation:

 OPERATION:

NOTE:

Once the LEDDROPIX controller is properly connected and turned on, the 

greeting "WELCOME TO CAMEO" is displayed for a short time during the boot 

process. After this operation, the controller is ready for use and changes to the 

mode that was previously selected.

AUTOMATIC CONTROL MODE (Auto Mode)

In the auto mode, one of the 30 different programs 

(Program:01 - Program:30), plus a program where all 30 programs

run in sequence (Program:Mix) can be activated.

Press the MODE button several times if necessary to enter the upper menu of 

the display. Now use the UP and DOWN buttons to select the 

Auto Mode and 

confi rm by pressing the 

ENTER button. The display now shows 

Auto Mode Speed. 

By pressing the UP or DOWN button, select the menu item 

Auto Mode Pro-

gram. Confi rm with ENTER. The desired program can now be selected using 

the UP and DOWN buttons (Program:01-30 and Program:Mix). Confi rm the input 

with ENTER.

Set the 

running speed of the activated program by now pressing the UP 

or DOWN buttons to select the menu item 

Auto Mode Speed. Confi rm with 

ENTER and then using the UP and DOWN buttons, set the speed to the desired 

value (Speed:00 = no movement in the program, Speed:01 = slowest speed, 

Speed:99 = maximum speed). Confi rm with ENTER. 

To permanently show a scene from a program, set the running speed of the 

corresponding program to Speed:01 and at the moment in which the desired 

scene is displayed, adjust the running speed to Speed:00. To enable another 

program, the running speed must fi rst be set to a value other than Speed:00.

MUSIC CONTROL MODE (Sound Mode)

In the music control mode, the LED curtains are controlled via the built-in 

microphone controller and the activated programs follow the beat of the music 

(bass pulses). 30 different programs (Program:01 - Program:30), plus a pro-

gram where all 30 programs run in sequence (Program:Mix), are available.

Press the MODE button several times if necessary to enter the the upper menu 

of the display. Now use the UP and DOWN buttons to select the 

Sound Mode 

and confi rm by pressing the 

ENTER button. 

The display now shows 

Sound Mode Program:xx. The desired program 

can now be selected using the UP and DOWN buttons (Program:01-30 and 

Program:Mix). Confi rm the input with ENTER.

To adjust the sensitivity with which the LED curtains react to music signals 

(bass impulses), select SENSITIVITY on the LEDDROPIX controller. When turned 

to the left, the sensitivity is lowered, when turned to the right, it is increased.

AC 220V - 240V / 50Hz

Power Consumption: 50 W

12

13

IT

ALIANO

POLSKI

ESP

AÑOL

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

DEUTSCH

ENGLISH