Cameo clmpar1 User Manual - Preventive Measures:

PREVENTIVE MEASURES: 

4

5

ENGLISH

DEUTSCH

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

ESP

AÑOL

POLSKI

IT

ALIANO

• Never let the AC cable come into contact with other cables. Handle the AC cable and all mains voltage connec-

tions with particular caution!

• Never remove warning or informative labels from the equipment.

• Do not open the equipment and do not modify the equipment.

• Do not connect this equipment to a dimmer-pack.

• Do not switch the equipment on and off in short intervals, as this will reduce the system’s life.

• Only use the equipment indoors.

• Do not expose to flammable sources, liquids or gases.

• Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the 

AC cable by the plug. Never pull out the AC plug by pulling the AC cable.

• Make sure that the available voltage is between 100 V AC - 250 V AC.

• Make sure that the AC cable is never crimped or damaged. Check the equipment and the AC cable periodically.

• If the equipment is dropped or damaged, disconnect the mains power supply immediately.

Have a qualified engineer inspect the equipment before operating again.

• If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it 

on immediately. The arising condensation might damage the equipment. Leave the equipment switched off until 

it has reached room temperature.

• If your product fails to function correctly, discontinue use immediately. Pack the unit securely (preferably in the 

original packing material), and return it to your Cameo dealer for service.

• Only use fuses of same type and rating.

• Repairs, servicing and power connection must only be carried out by a qualified technician. THIS UNIT CON-

TAINS NO USER SERVICEABLE PARTS.

• Never use any accessories or modifications not authorized by the manufacturer of this unit.

• Choose a location for operation where the unit is protected from vibration and where a fixed mounting position 

is provided. In case of overhead-mounting, follow appropriate rigging rules and your country’s regulations for 

rigging safety.

• Before plugging the AC cable in the wall outlet, check whether the AC mains voltage and frequency is the same as 

this product is specified for. Whenever your AC plug should not match the wall outlet, contact your dealer immediately.

• If fluids have spilled into the unit or small parts have intruded the unit, immediately switch off the unit and 

hand it over to the authorized service for a security check.

• Disconnect the unit from AC supply by pulling the AC plug out of the wall outlet or the unit’s AC socket during a 

thunder-storm in order to avoid any damage on the unit due to AC voltage peaks.

• In cause of not correct function of this unit or damaged AC cable or other damaged parts, pull immediately the 

AC plug out of the wall outlet and hand the unit over to the authorized service for a security check.

• To meet all aspects of functionality and security during maintenance work to be preformed on this unit, all 

parts should be replaced by genuine spare parts. Consequently, take care of your dealer or maintenance compa-

ny to be authorized by the manufacturer.