Cameo clmpar1 User Manual - Dmx:

CONEXIÓN

 DMX:

ENGLISH

DEUTSCH

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

ESP

AÑOL

POLSKI

IT

ALIANO

62

63

DMX-512

DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent fixtures 

and controllers. A DMX controller sends DMX data instructions from the controller to the fixture. DMX data 

are sent as serial data that travel from fixture to fixture via the “DATA IN“ and “DATA OUT” XLR terminals 

located on all DMX fixtures (most controllers only have a “DATA OUT” terminal).

DMX LINKING:

DMX is a language allowing all makes and models of different manufactures to be linked together and 

operate from a single controller, as long as all fixtures and the controller are DMX compliant. To ensure 

proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. 

The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For 

example a fixture assigned to a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, 

at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller 

knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain. 

Please check out our comprehensive DMX cable choices out of our Adam Hall product lines 3 STAR, 4 STAR 

and 5 STAR

Also remember that DMX cable must be daisy chained and cannot be split.