Cameo CLPFLATPRO12 User Manual - Controls and Display:

CONTROLS AND DISPLAY:

1

POWER IN

Neutrik powerCON power input socket. Operating voltage 110 - 240 V AC / 50 - 60 Hz. Connection via the 

supplied powerCON power cord.

2

POWER OUT

Neutrik powerCON power output socket. Used to supply power to additional CAMEO projectors.

3

DMX IN

3-pin XLR socket for connection of a DMX controller (e.g., DMX mixer).

4

DMX OUT

3-pin XLR socket for looping through the DMX control signal.

5

DMX IN

5-pin XLR socket for connection of a DMX controller (e.g., DMX mixer).

6

DMX OUT

5-pin XLR socket for looping through the DMX control signal.

7

MODE

Selection of the standalone functions, DMX modes, and DMX address.

8

ENTER

Makes it possible to change a value and confirm changes.

9

UP AND DOWN BUTTONS

Press the UP and DOWN buttons, for example, to change microphone sensitivity, strobe speed, or 

DMX address.

10

LIT LC DISPLAY

Displays the operating mode and values of individual functions. 

11

FUSE HOLDER

IMPORTANT INFORMATION: Always replace the fuse only with a fuse of the same type with the same rating 

(printed on the device). If the fuse blows repeatedly, please contact an authorised service centre.

8

9

IT

ALIANO

POLSKI

ESP

AÑOL

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

DEUTSCH

ENGLISH