Cameo CONTROL 54 User Manual - page 4

4

DEUTSCH

FRANCAIS

ESP

AÑOL

ENGLISH

IT

ALIANO

POLSKI

CAUTION:

To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts 

inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an 

electrical shock.

The warning triangle with exclamation mark indicates important operating and maintenance instructions.

Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for 

a cool-down period of at least 10 minutes before handling or transporting the device.

CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!

1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.

2. Do not stare, even temporarily, directly into the light beam. 

3. Do not look at the beam directly with optical instruments such as magnifiers.

4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where strobes are used.

INTRODUCTION

The CLCONTROL54 is a 54-channel DMX controller with which up to 9 DMX devices, or spotlights in a group with the same DMX start address 

can be operated. DMX spotlights can be configured as RGB, RGBW, and RGBWA devices to easily and quickly enable different colour presets 

using the 9 one-touch buttons. Colour changing programs (COLOUR FADE, COLOUR JUMP, AUTO) extend the features of the DMX controller as 

well as of the music control (SOUND) and strobe effect (STROBE). The manual control of the DMX devices is done using the 6 smooth faders.

FEATURES

54 DMX channels, 9 separately controllable DMX units/groups, 6 smooth channel faders, 2-line LC display with lighting, light and compact, 

operating as a desk station, mountable, preparation for wall mounting, power supply via supplied power pack or 9 V block battery.