Cameo CONTROL 54 User Manual - page 7
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
7
14
12
13
12
FIXTURE
To control one of the up to 9 DMX devices (or groups) connected to the DMX
controller as desired, press the FIXTURE button (LED indicator above the button
will light up), and then one-touch button (1 - 9), associated with the corresponding
device (or group).
13
COLOUR
9 different colour macros can be quickly and easily enabled as presets using the
one-touch buttons. Select a DMX spotlight, as described in point 12, press the
COLOUR button and select the desired colour preset using the one-touch buttons (N
14). The brightness is adjusted on the channel fader 3 MASTER.
14
ONE-TOUCH BUTTONS
One-touch buttons for selecting the DMX devices connected to the DMX controller,
or the colour presets (see points 12 and 13).
15
CHANNEL FADER
Channel fader 1 to 6 for controlling DMX devices connected to the DMX controller in
the operating modes COLOUR FADE, COLOUR JUMP, AUTO, MANUAL and the colour
presets COLOUR, as well as the stroboscope effect STROBE.
16
SOUND SENSITIVITY
Rotary encoder for adjusting the sensitivity of the integrated microphone in the
music control mode (SOUND). When turned to the left, the sensitivity is lowered,
when turned to the right, it is increased.
17
SOUND
Press the SOUND button (LED indicator above the button lights up), to control the
changing of the colours in the operating modes COLOUR FADE, COLOUR JUMP and
AUTO via the integrated microphone (bass pulses). Press SOUND to disable the
Music control mode (LED indicator turns off).
18
STROBE
Activate the stroboscope effect by pressing STROBE (LED indicator above the button
lights up) and set the strobe speed using the channel fader 1 SPEED (fader on 0 =
strobe effect disabled, fader on 10 = fastest flash speed). Press STROBE to disable
the strobe control mode (LED indicator turns off).
19
BLACKOUT
When pressing the BLACKOUT button, the DMX values of all connected DMX units
are set to 0, i.e. the light of the DMX spotlights goes out. Pressing BLACKOUT once
more re-activates the previously selected mode of the devices.
15
16
17
18
19