CammSys BlackSys CW-100 User Manual - page 4
4
Caution
SD Card Use
Be sure to turn OFF the power and LED is OFF before removing or
inserting the SD card. Removing the SD card while product is in use,
it can cause malfunctioning.
f
Use the authorized SD card which a manufacturer/
distributor provided. If authorized SD card is not used,
it can cause malfunctioning and loss of recorded Data.
f
Do not disassemble or remodel this product. It can
cause malfunctioning and service is not available.
f
SD card is expendable supply. After long period of use,
it may not able to record data correctly. Please change
the SD card To the new one.
f
Back up the important data in other storage devices
such as HDD,CD, USB. Data can be lost and damaged
if data is kept in SD card for a long time.
f
Check the recorded data of SD card in a regular basis
to make sure the recording is working well.
Power
f
This product is designed to use cigar jack power. In
case of using the power from the vehicle, consult it with
dealer in shop and any damage caused by the user’s
misuse, be noted that it’s user’s fault and manufacturer
is not responsible for any case.
f
Use the authorized cigar cable contained in the product
box. Avoid connection of power supply without
knowledge and experience. Any damage caused by
user’s misuse, be noted that it’s user’s fault and
manufacturer is not responsible for any case
f
Do not remove or insert SD card while power is turned
on, it can cause serious error of the product. Make
sure to turn OFF the power and LED is OFF before
removing or inserting the SD card. Removing the SD
card while product is in use it can cause damage of
video file.