- DL manuals
- Camon
- Rotavators
- C10
- Operating Instructions Manual
Camon C10 Operating Instructions Manual
Summary of C10
Page 1
Rotavators models c6 · c8 · c10 · c13 with powersafe ® clutch operating instructions before commissioning the machine, read operating instructions and observe warning and safety instructions..
Page 2: Contents
Camon rotavators page 2 psr/am/0912 contents page 3 safety page 4 controls diagrams - c6/c8 & c10 page 5 controls diagrams - c13 controls description page 6 assembly instructions page 7 how to start petrol engine how to start diesel engine page 8 operation how to stop engine page 9 operating hints p...
Page 3: Safety
Camon rotavators psr/am/0912 page 3 safety always start the engine in the open air do not smoke when refuelling do not mix oil with the fuel always stop the engine before making any adjustments, refuelling, moving or cleaning, or when the unit is unattended use only fuel from containers designed for...
Page 4: Controls
Camon rotavators page 4 psr/am/0912 controls a c b n f e d g/h a c b n f e d g h l m c10 c6 & c8.
Page 5: Controls
Camon rotavators psr/am/0912 page 5 controls l a c b n f e d g h m o p c13 (a) machine stop lever (red lever that stops the machine when released) (b) engine stop lever (c) clutch control lever (d) gear lever (the location of different gears are shown on the selector) (e) pto lever (there is a safet...
Page 6: Assembly Instructions
Camon rotavators page 6 psr/am/0912 1. Remove the machine from its packing case. 2. Rotatethehandlebarstemtotheoperatingpositionandfitthehandlebars-checkoperationand routing of cables. 3. Fit the wheels, ensuring the correct rotation (see diagram a below) and check the tyre pressures (20psi). 4. Fit...
Page 7: To Start Petrol Engine
Camon rotavators psr/am/0912 page 7 to start petrol engine using the dipstick provided, check the engine oil level. Top up with 10w/40 oil if necessary. Checkfuellevel.Onlyuseunleadedpetrolfromacleancontainer.Neverre-fuelwhentheengineis hot or running. Leave 1” air space in the fuel tank. Turn the f...
Page 8: Operation
Camon rotavators page 8 psr/am/0912 operation use handlebar adjuster (g) to set handlebar height. Hold the handlebar and pull up the clutch lever (c). Depress the red stop lever (a) and select working speed 1 (d). Never select a higher wheel speed for work. Ensure forward/reverse lever is in forward...
Page 9: Operating Hints
Camon rotavators psr/am/0912 page 9 operating hints let the machine do the work. Excessive downward pressure on the handlebars may cause the machine to jump. Apply gentle pressureandthemachinewillfinditsowndiggingdepthaccordingtothetypeofground.Ifthe ground is hard, position the depth adjuster centr...
Page 10: Maintenance Guide
Camon rotavators page 10 psr/am/0912 for engine maintenance please refer to engine manufacturers manual. After every hour of operation stop the engine and remove the spark plug cap. Check engine oil level (recommended oil sae 10w/40). Remove all foreign matter from the digging knives assembly e.G. W...
Page 11: Maintenance Programme
Camon rotavators psr/am/0912 page 11 maintenance programme operation every day every week every month every 6 months engine check engine oil level 10w/40 see separate engine manual x x gearbox & controls check gearbox oil level (see page 13) x x check nuts & bolts x x ensure clutch cable has free pl...
Page 12: Service Information
Camon rotavators page 12 psr/am/0912 service information every week • with the machine on a level surface, check the gearbox oil level, top up as necessary using the correct oil as listed below. The gearbox oil level should reach between the two notches on the dipstick (fig.2,c) . After the first 2 ...
Page 13: Service Information
Camon rotavators psr/am/0912 page 13 service information gearbox oil quantities camon c6/c8/c10 = approx 2.3 litres camon c13 = approx 2.6 litres oil type fuchs titan hyp 90 valvoline 80w-90gl-5 morris ep80w/90 api gl5 castrol epx80w-90 motorex hypoid sae 80w/90 api gl5 millers hypoid 80w90 gl5 comm...
Page 14: Troubleshooting Guide
Camon rotavators page 14 psr/am/0912 troubleshooting guide problem possible cause remedy unable to select gear pressure washing has removed lubrication of gear lever detent ball. Grease the detent ball and quadrant. Unable to pull engine over machine has been tipped on side for cleaning and engine o...
Page 15: Risk Assessment
Camon rotavators psr/am/0912 page 15 risk assessment hazards risk level action needed general the machine should only be used by trained operators. Machine tipping over low do not use on slopes over 25 o . Machine jumping high ensure the centre knife is in good condition and adjusted to suit the gro...
Page 16: Service Record
Camon rotavators page 16 psr/am/0912 service record to ensure your machine is kept in peak condition, we recommend that you have it serviced regularly by one of tracmaster’s authorised agents. Tofindoutwhoyourlocalauthorisedagentis,contacttracmasteron01444247689. Service schedule first 2 weeks or 30...
Page 17: Warranty Registration
Camon rotavators psr/am/0912 page 17 to validate your warranty please complete the form below and return it to: tracmaster ltd, sovereign centre, victoria road, burgess hill, rh15 9lr alternatively visit www.Tracmaster.Co.Uk and complete the online form. Customer details name: .........................
Page 18: Machine Overview Diagram
Camon rotavators page 18 psr/am/0912 machine overview diagram throttle lever machine stop lever parking brake lever engine stop lever clutch lever wheel speed lever handlebar adjuster digging knives engagement lever gearbox oil level petrol cap engine oil level choke lever fuel tap recoil starter de...
Page 19: Vibration & Sound Levels
Camon rotavators psr/am/0912 page 19 machine rpm vibration m/sec 2 - 3 axis sound level db(a) camon c6 rotavator 3100 2.9 85.0 camon c8 rotavator 3100 2.9 85.0 camon c10p rotavator 3000 4.3 85.0 camon c10d rotavator 3600 7.3 97.0 camon c13p rotavator 3000 4.4 88.0 camon c13d rotavator 3600 7.3 97.0 ...
Page 20
© tracmaster ltd 2012. Specificationsaresubjecttochangewithoutpriornotice. Tracmaster ltd, sovereign centre, victoria road, burgess hill rh15 9lr t: +44 (0) 1444 247689 f: +44 (0) 1444 871612 w: www.Tracmaster.Co.Uk e: info@tracmaster.Co.Uk twt/pu/0812.