Camon C10 Operating Instructions Manual - Troubleshooting Guide
CAMON Rotavators
Page 14
PSR/AM/0912
Troubleshooting Guide
PROBLEM
POSSIBLE CAUSE
REMEDY
Unable to select gear
Pressure washing has removed
lubrication of gear lever detent
ball.
Grease the detent ball and
quadrant.
Unable to pull engine over
Machine has been tipped on
side for cleaning and engine
oilhasfilledthecylinderbore
causing a hydraulic lock.
Remove spark plug and air
filter.Standtoonesideand
pull over engine to clean out oil.
Changeengineoilandairfilter.
Clean spark plug.
Machine suddenly leaps
forward whilst cultivating
Newsetoftineshasbeenfitted
the wrong way round.
Checkfittingandrefitif
necessary.
Centre knife is worn out or
missing.
Check centre knife and replace
if necessary.
Centre knife lifted too high on
hard ground.
Lower centre knife.
No drive to wheels or
digging unit
Check gearbox oil level.
Top up if necessary with API
GL-580w/90oil(seepage13).
Engine smokes
There may be petrol in the
engine oil due to fuel tap being
left on during transportation.
Change engine oil.
Contaminatedairfilter.
Replace element.