Camos CSA-345 Instruction Manual - page 5
2. Connect the power cable (red/black) to the control box and power source. This can be
between 10V & 30V D.C.
Positive terminal (+) = red colour
Negative terminal (-) = black colour
3. Connect the control box with the middle antenna cable socket.
Then connect one receiver (via the short co-ax cable) with the socket marked
"RECEIVER" on the back of the control box, the other receivers pls connect directly
with the remaining sockets of the antenna.
4. Instead of the 3 receiver you can also connect a satellite multi switch to the antenna.
This enables you to use more than 3 receiver with the antenna.
Pleas pay attention that the multi switch is able to be connected directly with "Quad
LNB", not only "Quattro LNB".
3x Satellite-
receiver
3x Monitor or TV
with AV input
Receiver socket
Antenna socket (F)
Power socket
Control box (rear-view)
Control box
CAMOS CSA-450
CSA-345