Campbell CR10XTCR Instruction Manual - 3. Installation and Wiring
Manual is about: Thermocouple
of
12
CR10XTCR Thermocouple Reference
2
FIGURE 1. Error Produced by Polynomial Fit to Published Values
3. Installation and Wiring
The wiring diagram for the CR10XTCR is shown in Figure 1. The probe
requires a single-ended analog input channel and an excitation channel. After
the CR10XTCR and thermocouple are connected to the datalogger, install the
wiring panel cover (Figure 2 and 3).
CR10XTCR
LT#343403
FIGURE 2. Wiring Diagram
Analog Ground;
Clear (AG)
Switched
Excitation;
Black (E3)
Single-Ended Input; Red (1H)