1. DL manuals
  2. Campbell
  3. Modem
  4. Redwing 100
  5. Instruction Manual

Campbell Redwing 100 Instruction Manual - Warranty and Assistance

Manual is about: Airlink CDMA Modems

Summary of Redwing 100

  • Page 1

    Instruction manual redwing 100 and redwing 105 airlink cdma modems 7/04 c o p y r i g h t ( c ) 2 0 0 4 c a m p b e l l s c i e n t i f i c , i n c ..

  • Page 2: Warranty and Assistance

    Warranty and assistance the redwing 100 and redwing 105 airlink cdma modems is warranted by campbell scientific, inc. To be free from defects in materials and workmanship under normal use and service for twelve (12) months from date of shipment unless specified otherwise. Batteries have no warranty....

  • Page 3

    I redwing cdma table of contents pdf viewers note: these page numbers refer to the printed version of this document. Use the adobe acrobat® bookmarks tab for links to specific sections. 1. Introduction.................................................................1 2. Specifications .................

  • Page 4

    This is a blank page..

  • Page 5: Cdma Modems

    1 redwing100 and redwing105 airlink cdma modems 1. Introduction redwing modems are full-duplex, digital cellular modems that communicate with a base station pc via code division multiple access (cdma) network and public switched telephone network (pstn). Redwing100 modems are for use on the verizon ...

  • Page 6: 3.  Configuration

    Redwing100 and redwing105 airlink cdma modems 2 2.3 power considerations • a power cable included with the modem connects to the datalogger's 12 v or switched 12 v terminal. Connection to the switched 12 v terminal allows the datalogger to switch power to the modem during scheduled transmission inte...

  • Page 8

    Redwing100 and redwing105 airlink cdma modems 4 this is a blank page..

  • Page 9: Terminal Emulator

    A-1 appendix a. Configuring modem with a terminal emulator programming the modem with a terminal emulator is not recommended. Please first attempt programming with the cellset.Ext program available from campbell scientific, inc. Items needed: • computer with a com port. • 9-pin cable to connect betw...

  • Page 10

    Appendix a. Configuring modem with a terminal emulator a-2 apply power to the modem and connect it to the computer via the 9-pin serial cable. Enter the following at command: at+ipr=9600 and then press enter. This has now changed the baud rate from 115200 to 9600. You need to change the baud rate in...

  • Page 11: Datalogger

    Appendix a. Configuring modem with a terminal emulator a-3 a.3 programming the redwing for use with a datalogger the redwing needs a few settings changed in it to power-up ready to work with the datalogger. Enter the following: • type at+atinit=&c1&d0s0=1$qcvad=4%+ifc=0^0,c,%,^ then press enter. • t...

  • Page 12

    Appendix a. Configuring modem with a terminal emulator a-4 this is a blank page..

  • Page 13

    This is a blank page..

  • Page 14

    Campbell scientific companies campbell scientific, inc. (csi) 815 west 1800 north logan, utah 84321 united states www.Campbellsci.Com info@campbellsci.Com campbell scientific africa pty. Ltd. (csaf) po box 2450 somerset west 7129 south africa www.Csafrica.Co.Za sales@csafrica.Co.Za campbell scientif...