Campbell Redwing 100 Instruction Manual - Terminal Emulator
Manual is about: Airlink CDMA Modems
of
14
A-1
Appendix A. Configuring Modem with a
Terminal Emulator
Programming the modem with a terminal emulator is not
recommended. Please first attempt programming with the
CELLSET.EXT program available from Campbell Scientific,
Inc.
Items needed:
• Computer with a COM port.
• 9-pin cable to connect between the computer and the Redwing.
• A terminal program on the computer “HyperTerminal”.
• 12 volt DC applied to the Redwing.
• CDMA account
A.1 HyperTerminal Setup
Under “Connect using”, select the COM port you will be using.
Set COM Properties to:
Bits per second (baud) = 115200
Data bits = 8
Parity = None
Stop bits = 1
Flow control = None
NOTE