Camry EK-19A SERIES Instructions For Use - page 4
"ZERO" OR "TARE" FUNCTION
To weigh different loads consecutively without removing loads from the scale.
Put first Load on the scale, get weight reading. Press button to reset the
LCD reading to "0" before adding next load. You can repeat this operation.
5
1.
2.
WARNING INDICATORS
1. Replace new battery.
2. Scale overload. Remove item to avoid
damage.Max.weight capacity is
indicated on the scale.
MANUAL SHUT OFF
Auto shut-off occurs if no operation
or shows the same weight reading
for 30 seconds.
AUTO SHUT OFF
6
Condition 1: "TARE" function
When total sum of all loads on scale>0g
Condition 2: "ZERO" function
When total sum of all loads on scale<0g
LCD will show ----- or 0g each time
is pressed. ----- means processing, please
wait for a moment. When 0g and icon T
on lower left corner of LCD show up together,
it means TARE function is active.Max. Capacity
is reduced by total weight of all loads.
ON/OFF
ZERO
ON/OFF
ZERO
Press
ON/OFF
ZERO
Press
ON/OFF
ZERO
ON/OFF
ZERO
LCD display will show --- or 0g
each time is pressed. "----" means
processing, please wait for a moment.
When LCD shows "0g", it means "ZERO"
function is active. Max capacity remains
unchanged.
ON/OFF
ZERO
ON/OFF
ZERO
To maximize battery life, please press
button for 3 seconds to turn off
scale after use.