Vuenet easylink ver. 1.2 user`s manual external wireless video and audio transmission system for ip cameras hd and uhd in the band 5.1 - 5.8 ghz.
Thank you for choosing the vuenet easylink. We trust that its unique features will come in very handy. Please, read this instruction manual to ensure safe operation and maximise efficiency of the device. Safety and maintenance tips in order to safely use our device, you should read and observe the t...
The vuenet easylink module is compliant with provisions related to the safety in using electrical devices. Observe the following guidelines: • the power outlet must be earthed in compliance with applicable provisions, • before transferring the device or performing any other technical operations, dis...
Vuenet easylink system for transmission of video and audio from ip cameras. Key features of the module vuenet easylink: • easy configuration on switches without the need of a pc • vuenet easylink can work both as a receiver and a transmitter • ensures continuous and stable transmission • works in br...
This can save a lot of valuable time with the configuration of many different cameras. Master receiver and all slave transmitters must be set to the same operating channel to establish a connection. Each next set working nearby must be set to a different operat- ing channel..
Multipoint configuration vuenet easylink can be connected in point-to-multipoint configuration with up to 4 transmitters to one receiver. These settings are configured by switches 7 and 8 in each transmitter according to the following formula: after 90 seconds since power start equipment will make a...
Montage assembly bands designed to be mounted on a mast should be inserted into the corresponding holes in the rear of the body of the device and firmly tighten. Attach the device to the mast with the an- tenna pointed directly at the point of receiving. Be sure to use two bands. Bands contained in ...
Connection and start-up it is recommended that the first start-up and configuration of the system is done at the desk at small distances. This can save a lot of valuable time with the configuration of many different cameras. Transmitter (ip camera): • set dipswitch no. 1 to off (transmitter mode), s...
Receiver powered by poe (nvr). • set the dipswitch no. 1 to on (receiver mode), set the operating channel by a table identical to the transmitter, set dip7 and dip8 to on (up) • connect nvr with the network cable to the port 1 or lan port in poe power supply. • connect included power supply 48vpoe t...
Examples of application transmitter 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 192.168.120.2 channel: 165 1 2 3 4 5 6 7 8 transmitter 1 2 3 4 5 6 7 8 192.168. 116.2 channel: 149 1 2 3 4 5 6 7 8.
Transmitter 192.168.118.5 channel: 157 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8.
Table of available operating frequencies table of frequencies outside the eu and the us and paid use of specific channels according to their purpose: • ce - europe • fcc - us using other frequencies depends on the legal regu- lations of the country where you are. If you are not sure about regulation...
1. General warranty terms the device is supplied with a standard warranty card. The manufacturer declines all other warranties. In no case the producer is liable for any damages (including, without limitation, consequential, special, or incidental damages, or damages for loss of profits, business in...
Device disposal the mark presented to the left informs that this electrical or electronic device, after its use has ended, cannot be thrown together with household refuse the device should be delivered to a specialised collection point detailed information about the closest collection point is avail...
