Camsat VueNet EasyLink User Manual - page 4
VueNet EasyLink
System for transmission of video and audio from IP cameras.
Key features of the module VueNet EasyLink:
•
Easy configuration on switches without the need of a PC
•
VueNet EasyLink can work both as a receiver and a transmitter
•
Ensures continuous and stable transmission
•
Works in bridge mode - Transparently sends all data irrespective of
•
IP addresses of cameras and recorders.
•
Works in both Point-to-Point and Point-to-Multipoint configurations and receives si-
gnals from 4 transmitters.
•
27dBm output power in 5GHz band
•
Built-in dual-antenna MIMO 5 Ghz 2 x 14 dBi (LoS range 2.5 km)
•
IP65 external housing
•
Operating temperature from -20 ° C to +55 ° C
Contents of the package
•
VueNet EasyLink x 1
•
PoE power supply 48V 0.5A with European cable 230V x1 pcs.
•
Clamps x 2pcs
•
User manual and CE Declaration of Conformity
Description of connectors and LEDs
RESET - A button for resetting the radio module to the default settings
PORT 1 & PORT 2 - LAN ports
DIPswitch - switches used to configure the device
POWER - red LED indicating power status
WLAN - LED indicating wireless transmission
LAN1 & LAN 2 - LED for wired transmission
- LEDs indicating signal strength
Preparation for operation
It is recommended that the first start-up and configuration of
the system is done on the desk at small distances.