Candy Activa MyLogic 13 User Instructions - page 17
FR
IT
TOUCHE "REPASSAGE FACILE"
Si vous utilisez cette touche, il
vous sera possible de réduire
la formations des plis, selon le
programme choisi et la
nature du tissu lavé.
Tissu mixte :
- le refroidissement de l’eau
sera fait graduellement pour
éviter les chocs thermiques
- la vidange sera faite sans
aucune action mécanique
du tambour
- une phase d’essorage pour
assurer la distension maximale
des fibres.
Tissu délicat (sauf laine):
- Votre lave-linge effectuera
les actions ci dessus
mentionnées, ensuite un "arrêt
cuve pleine" après le dernier
rinçage
Laine:
- Votre lave linge effectuera
un "arrêt cuve pleine".
Pour terminer le cycle des
tissus délicats et de la laine,
les opérations à accomplir
sont les suivantes :
1. Relâcher la touche de
repassage facile pour
terminer le cycle avec la
vidange et l’essorage.
2. Sinon, vous pouvez
effectuer une simple vidange:
- éteignez votre lave-linge
avec la touche
"marche/arrêt"
- sélectionnez le programme Z
- allumez votre lave-linge
TASTO STIRO FACILE
Attivando questa funzione è
possibile ridurre al minimo la
formazione di pieghe
personalizzando ulteriormente
il ciclo di lavaggio in base al
programma scelto ed al tipo di
biancheria da lavare.
In modo particolare per i
tessuti misti l’azione
combinata di una fase di
raffreddamento graduale
dell’acqua, l’assenza di
rotazione del cesto durante gli
scarichi dell’acqua ed una
centrifuga delicata a bassa
velocità assicura la massima
distensione dei capi.
Per i tessuti delicati, ad
esclusione della lana, vengono
svolte le fasi già descritte sopra
per i tessuti misti ad eccezione
del raffreddamento graduale
dell’acqua ma con l’aggiunta
di una fase di fermo acqua in
vasca con stop dopo l’ultimo
risciacquo.
Nel programma lana questo
tasto ha la sola funzione di
lasciare i capi immersi
nell’acqua alla fine dell’ultimo
risciacquo al fine di distendere
perfettamente le fibre.
Per terminare il ciclo dei tessuti
delicati e della lana le
operazioni possono essere:
- rilasciare il tasto per
terminare il ciclo con la fase di
scarico e centrifuga
oppure nel caso in cui si voglia
effettuare solo lo scarico
- spegnere la macchina
premendo il tasto
avvio/arresto
- impostare il programma Z
- riaccendere la macchina
premendo nuovamente il tasto
avvio/arresto
32
33
E
DE
TASTE LEICHTBÜGELN
Diese Funktion reduziert die
Knitterbildung durch die
individuelle Wahl der
Programme und der
Wäscheart.
Im besonderen für die
Mixwäsche sorgt die
Kombination der langsamen
Abkühlphase verbunden mit
dem
Stillstand der Wäsche
während des Abpumpens
und einem Schonschleudern
für die optimale
Schonung der Wäsche.
Für die Feinwäsche, mit
Ausnahme der Wolle, sind
die Phasen wie in der
Mixwäsche beschrieben mit
Aus-
nahme der Abkühlphase
unter Hinzunahme des
Wasserstops nach dem
letzten Spülgang.
Im Wollprogramm dient
diese Taste ausschließlich als
Spülstop um die Fasern zu
glätten.
Um die Feinwäsche bzw. das
Wollprogramm zu beenden
können Sie wie folgt
vorgehen:
Beenden Sie die Funktion
Leichtbügeln um das
Programm mit Abpumpen
und Schleudern zu
beenden.
Zur Beendigung des
Programms nur durch
Abpunpen:
Schalten Sie das Gerät am
Ein/Aus Schalter aus.
Wählen Sie das Programm Z.
Schalten Sie das Gerät
wieder ein.
NL
EN
TOETS “ANTIKREUK”
Dit programma is bedoeld om
het kreuken van uw wasgoed
te beperken. U kunt een
wasprogramma selecteren
dat past bij het te wassen
wasgoed, dit is afhankelijk van
de weefsels en van de graad
van vervuiling.
Bij gemengde weefsels neemt
de watertemperatuur tijdens
het wassen geleidelijk af.
De trommel stopt met draaien
als het water afgepompt
wordt en het programma
eindigt met centrifugeren met
een laag toerental.
Voor fijne was, met
uitzondering van wol, worden
dezelfde fases doorlopen als
bij gemengde weefsels. Er zijn
echter wel twee verschillen:
de fase waarbij het water
geleidelijk wordt afgekoeld
ontbreekt en er wordt een
andere fase aan
toegevoegd: na de laatste
spoeling blijft de kuip vol met
water.
Voor wol is een speciaal
wasprogramma ontworpen. Bij
dit programma blijven de
weefsels na de laatste
spoeling in het water liggen.
Om het wasprogramma van
fijne weefsels en wol te
beëindigen, heeft u twee
mogelijkheden:
- Druk op de ‘kreukvrij’ -knop
om het programma te
beëindigen hierdoor wordt
het water afgepompt.
Of U eindigt het programma
met alleen het afpompen van
het water:
- Zet de machine uit door op
de aan/ uit knop te drukken
- Draai de programmaknop
naar programma “Z”
- Druk de aan/ uit knop weer
in (het water wordt
afgepompt)
CREASE GUARD BUTTON
The Crease Guard function
minimizes creases as much
as possible with a uniquely
designed anti-crease system
that is tailored to specific
fabrics.
MIXED FABRICS - the water is
gradually cooled throughout
the final two rinses with no
spinning and then a delicate
spin assures the maximum
relaxation of the fabrics.
DELICATE FABRICS – final two
rinses with no spinning and
then the fabrics are left in
water until it is time to
unload. When you are ready
to unload, press the Crease
Guard button – this will drain
and spin ready for emptying
WOOLLENS - after the final
spin, the fabrics are left in
water until it is time to
unload. When you are ready
to unload, press the Crease
Guard button – this will drain
and spin ready for emptying
If you do not want to spin the
clothes and activate drain
only :-
- Turn the appliance off by
pressing the on / off button
- Select Programme Z
- Switch on the appliance
again by pressing the on / off
button