- DL manuals
- CanMore
- GPS
- GT-750F
- User Manual
CanMore GT-750F User Manual - page 10
Summary of GT-750F
Page 1
Canmore bluetooth gps receiver gt-750f user manual version 1.0 1.
Page 2
2.
Page 3: Table of Contents
Table of contents 1.Product introduction ........................................................................................................... 5 1.1 overview............................................................................................................................................
Page 4
2.4.3. Bluetooth status led (blue) ................................................................................................................. . ...11 2.4.4. Gps status led (green).....................................................................................................................
Page 5: 1.Product Introduction
1.Product introduction 1.1 overview z fast acquisition high-sensitivity 44 channel bluetooth-gps receiver. The gt-750f is a single board of bluetooth-gps receiver for customers who require easy system integration and minimal development risk. The gt-750f is optimized for good performance and low cos...
Page 6
Z cold start z hot start z 5m cep accuracy z sbas (waas, egnos) support z bluetooth version 2.0 compliant z compatible with bluetooth devices with serial port profile (spp) z charger circuitry and battery socket for n3650 li-ion battery z more than 13 hours of operation z dimension:73x44x21 mm 1.3 t...
Page 7
Z ackup power: 3v for battery socket li-ion rechargeable battery (1000 ma) 1.3.4 performance 1.3.4.1 gps z receiver type 44 parallel channel, l1 c/a code z accuracy position 5m cep velocity 0.1m/sec z startup time z signal reacquisition 1s z sensitivity -145dbm acquisition -158dbm tracking z update ...
Page 8: 2.Before Start
Z class-2 operation, 1.17dbm output level up to 10m of operation z details specifications please refer to appendix d at page 19. 1.3.4.3 battery z battery socket li-ion rechargeable battery z capacity: 740mah 1.4 application z pdaand cellular phone navigation z navigation and positioning z automotiv...
Page 9
Missed, please contact your reseller at once. Z gt-750f bluetooth gps receiver z carcharger z user manual cd z ac adapter(optional) 2.2 power switch :push the power switch is on/off power switch on/off 9.
Page 10
2.3 led display 1 2 3 4 battery and charger status bluetooth status gps status 10
Page 11
1 yellow led indicate slow power 2 red led indicates power is in charging 3 z flashing quickly(every onec for 2 second)-position is fixed. Z flashing slowly(every onec for 3 second)-device is on but position is not fixed. Z flashing quickly(every onec for 2 second)-position is fixed. 4 z flashing sl...
Page 12
Flashing quickly(every onec for 2 second)-position is fixed. Flashing slowly(every onec for 3 second)-device is on but position is not fixed. 2.4.5.Battery status led (red/yellow) none-battery has adequate power supply. Yellow-power is low. Charging immediately is required. Red-connected to power ch...
Page 13
2.5.3. Step3:connect to bluetooth-enabled devices from your bluetooth-enabled handheld device, execute bluetooth application software to search gt-750f and then connect it to your device. If the connection between your device and gt-750f is successful, the blue led flashing slowly(every onec for 3 s...
Page 14: 3. Bluetooth Connection
Z plug adapter connector into handheld device connector and plug car charger into cigar-lighter. 3. Bluetooth connection please follow below instructions step by step: the pass word is “0000” 3.1 turn on the device turn the power switch on. The bluetooth status leds(blue led) and gps status led (ora...
Page 15
3.3browse services: z double click the device with which you want to establish spp connection to browse its service z connect to spp slave select spp slave click “next” click “finish” z finish bluetooth manager setup z tap and hold “rikaline: spp slave” z click “connect” z finish bluetooth setup 15.
Page 16
3.4 application: now you can use any navigation system through bluetooth spp profile. 16.
Page 17
This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that maycause undesired operation. You are cautioned that change...