CanMore GT-750F User Manual - page 13
2.5.3. STEP3:Connect to Bluetooth-Enabled Devices
From your Bluetooth-enabled handheld device, execute Bluetooth application software to search GT-750F and then
connect it to your device. If the connection between your device and GT-750F is successful, the Blue LED Flashing
slowly(every onec for 3 second)-Bluetooth are transmiting data.
Note:Type in pin code=8888 during configuration.
2.5.4. STEP4:Connect to your Navigation Software
z
Load your GPS mapping or routing software, along with the corresponding maps of the areas that you are
occupyingor plan to travel .
z
Start the application. Make sure the application is set for the COM port that your Bluetooth-enabled mobile
device will use for serial communication. Now you should be ready to use your GPS application as directed by
the user documentation that came with the software. More configurations may be necessary.
2.6 How to replace Lithium-ionBattery
z
Open the bolt on the bottom cover of GT-750F and take the Li-ion battery out.
z
Place new Li-ion battery into the room of GT-750F
z
The GT-750F Li-ion battery is replaceable and rechargeable.
z
The GT-750F Li-ion battery can last more than 13 hours in continuous operation mode.
2.7 How to use Car Charger to charge your handheld device
z
Connect car charger into your adapter connector of GT-750F.
13