Canon im2520f User Manual - 6.1
6
6.1 Performing One-Touch Dial Transmission
6-2
im2520f
Trans
m
it
ting Various Faxes
Chap
te
r 6
6.1
Performing One-Touch Dial Transmission
When transmitting by a one-touch key
Perform the following procedure after storing the destination number beforehand in
the one-touch keys. For how to register for one-touch keys, refer to One-Touch Dial
Number Registration of “Configuring the Utilities and Fax” in the Advanced
Operations volume.
1
Set the original in the paper feed tray or on the glass.
2
Press the [Fax/Scan] key.
3
Touch [One-Touch] and designate
the destination.
❍
Multiple destinations can be
selected. Up to a maximum of
300 destinations can be
specified.
❍
If you touch a key mistakenly,
pressing the same key again
will release it.
❍
It is possible to check the
content of all faxes to be sent
by pressing the [Mode Check]
key after designating the destination.
4
Press the [Start] key.
❍
When the original is set on the original glass, after is scanned, touch [Scan
End].
5
Check the transmission content in the notification screen.
❍
When multiple destinations have been specified, check the transmission
content of each transmission in the notification screen, and touch [Enter].
ND-L_Fax_MC.book Page 2 Saturday, August 9, 2003 10:35 AM